EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration

Damion T Dixon iD, Cheryl T Gomillion iD

Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2023-07 · 111 (7) · 1351-1364

DOI: 10.1002/jbm.b.35239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, online erschienen am 24.02.2023. Verfasst von Damion T Dixon und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental, Civil, Agricultural and Mechanical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA. Hauptthemen laut MEDLINE: Tissue Scaffolds, Bone Regeneration. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: MTF Biologics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Various methods have been used to treat bone defects caused by genetic disorders, injury, or disease. Yet, there is still great need to develop alternative approaches to repair damaged bone tissue. Bones naturally exhibit piezoelectric potential, or the ability to convert mechanical stresses into electrical impulses. This phenomenon has been utilized clinically to enhance bone regeneration in conjunction with electrical stimulation (ES) therapies; however, oftentimes with critical‐sized bone defects, the bioelectric potential at the site of injury is compromised, resulting in less desirable outcomes. In the present study, the potential of a 3D‐printed conductive polymer blend to enhance bone formation through restoration of the bioelectrical microenvironment was evaluated. A commercially available 3D printer was used to create circular, thin‐film scaffolds consisting of either polylactide (PLA) or a conductive PLA (CPLA) composite. Preosteoblast cells were seeded onto the scaffolds and subjected to direct current ES via a purpose‐built cell culture chamber. It was found that CPLA scaffolds had no adverse effects on cell viability, proliferation or differentiation when compared with control scaffolds. The addition of ES, however, resulted in a significant increase in the expression of osteocalcin, a protein indicative of osteoblast maturation, after 14 days of culture. Furthermore, xylenol orange staining also showed the presence of increased mineralized calcium nodules in cultures undergoing stimulation. This study demonstrates the potential for low‐cost, conductive scaffolding materials to support cell viability and enhance in vitro mineralization in conjunction with ES.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsBone RegenerationPolymersOsteogenesisPolyestersElectric StimulationPrinting, Three-DimensionalTissue Engineering

Stichwörter der Autor:innen

3D printingbone regenerationbone tissue engineeringconductive bone scaffoldelectrical cell responseelectrical stimulation

Substanzen

PolymersPolyesters

Autor:innen und Institutionen

  • School of Environmental, Civil, Agricultural and Mechanical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA.
  • School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia, USA.

ORCID-Profile: Damion T Dixon, Cheryl T Gomillion

Förderung

  • MTF Biologics

Zitieren

APA

Dixon, D. T., & Gomillion, C. T. (2023). 3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 111(7), 1351-1364. https://doi.org/10.1002/jbm.b.35239

Vancouver

Dixon DT, Gomillion CT. 3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2023;111(7):1351-1364. doi:10.1002/jbm.b.35239

BibTeX
@article{Dixon2023,
  author = {Dixon, Damion T and Gomillion, Cheryl T},
  title = {3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = {2023},
  volume = {111},
  number = {7},
  pages = {1351--1364},
  doi = {10.1002/jbm.b.35239}
}
Kostenlos starten →