EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biocompatibility and antimicrobial efficacy of iodine-supported titania nanotubes on 3D-printed Ti-6Al-4V implants

Pariwat Taweekitikul iD, Abdul Azeez Abdu Aliyu, Nanthawan Jinakul, Amaraporn Wongrakpanich, Chedtha Puncreobutr, Jirapon Khamwannah, Boonrat Lohwongwatana, Saran Tantavisut iD

PLOS One · 2025

DOI: 10.1371/journal.pone.0339618 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Pariwat Taweekitikul und 7 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Engineering Program, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand. Hauptthemen laut MEDLINE: Titanium, Nanotubes, Printing, Three-Dimensional, Iodine. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ratchadapiseksompotch Research fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Implant-associated infections (IAI) are a significant concern within the field of orthopedics. To develop an implant with antimicrobial properties, titania nanotubes (TNTs) supported with iodine were synthesized on 3D-printed Ti-6Al-4V implants using the electrochemical anodization (ECA) technique. This study aims to analyze the release profile of iodine and the antimicrobial efficacy and cytotoxicity of the iodine-supported TNT (I-TNTs) on the 3D-printed Ti-6Al-4V implant. 3D-printed Ti-6Al-4V samples were doped with six different iodine formulations, including four test groups containing TNT and two control groups without TNT. As printed 3D Ti-6Al-4V samples and TNTs samples without iodine were also utilized as control groups. In vitro assays were performed to assess the drug elution, cytotoxicity, and antimicrobial efficacy. All tested I-TNTs samples exhibited sustained iodine release over 28 days without an initial burst. Notably, the amount of iodine released from I-TNTs was significantly higher compared to the control group. TNTs with a higher aspect ratio (AR) and the ECA process using higher potassium iodide (KI) concentration were found to have better cumulative iodine release profiles. No cytotoxicity was observed when tested against the mouse calvaria-derived preosteoblast cell line (MC3T3-E1). The antibacterial property of the implant surface became evident within 24 hours, with complete inhibition of S. aureus and MRSA in I-TNTs samples. This innovative approach is an intriguing alternative for preventing infections on 3D-printed Ti-6Al-4V implants.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumNanotubesPrinting, Three-DimensionalIodineProstheses and ImplantsAnti-Bacterial AgentsBiocompatible MaterialsAnti-Infective AgentsAlloysAnimalsMiceStaphylococcus aureusCell LineMicrobial Sensitivity TestsMaterials Testing

Substanzen

TitaniumAlloysIodinetitanium alloy (TiAl6V4)titanium dioxideAnti-Bacterial AgentsBiocompatible MaterialsAnti-Infective Agents

Autor:innen und Institutionen

  • Biomedical Engineering Program, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand.
  • Department of Orthopedic, Queen Savang Vadhana Memorial Hospital, Chonburi, Thailand.
  • Biomedical Engineering Research Center, Chulalongkorn University, Bangkok, Thailand.
  • M3D Laboratory, Advanced Materials Analysis Research Unit, Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand.
  • Department of Microbiology, Faculty of Pharmacy, Mahidol University, Bangkok, Thailand.
  • Department of Pharmacy, Faculty of Pharmacy, Mahidol University, Bangkok, Thailand.

ORCID-Profile: Pariwat Taweekitikul, Saran Tantavisut

Förderung

  • Ratchadapiseksompotch Research fund

Zitieren

APA

Taweekitikul, P., Aliyu, A. A. A., Jinakul, N., Wongrakpanich, A., Puncreobutr, C., Khamwannah, J., Lohwongwatana, B., & Tantavisut, S. (2025). Biocompatibility and antimicrobial efficacy of iodine-supported titania nanotubes on 3D-printed Ti-6Al-4V implants. PLOS One. https://doi.org/10.1371/journal.pone.0339618

Vancouver

Taweekitikul P, Aliyu AAA, Jinakul N, Wongrakpanich A, Puncreobutr C, Khamwannah J, et al. Biocompatibility and antimicrobial efficacy of iodine-supported titania nanotubes on 3D-printed Ti-6Al-4V implants. PLOS One. 2025. doi:10.1371/journal.pone.0339618

BibTeX
@article{Taweekitikul2025,
  author = {Taweekitikul, Pariwat and Aliyu, Abdul Azeez Abdu and Jinakul, Nanthawan and Wongrakpanich, Amaraporn and Puncreobutr, Chedtha and Khamwannah, Jirapon and Lohwongwatana, Boonrat and Tantavisut, Saran},
  title = {Biocompatibility and antimicrobial efficacy of iodine-supported titania nanotubes on 3D-printed Ti-6Al-4V implants},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0339618}
}
Kostenlos starten →