EUVIMEDScopri EUVIMED
Crossref

Thermodynamic Modeling of Hydrogen Fuel Reformers Through Gibbs Energy Minimization

Mustafa Turhan Çoban, Hadi Genceli, Mustafa Asker, Oguz Emrah Turgut, Mert Sinan Turgut

Fuel Cells · 2026-04 · 26 (2)

DOI: 10.1002/fuce.70071 ↗

At a glance

Journal article in Fuel Cells, published online on 2026-03-13. Written by Mustafa Turhan Çoban and 4 co-authors. 35 references.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

In this study, a framework for a hydrogen reformer is developed. The equilibrium compositions are predicted by using Gibbs free‐energy minimization. In this context, six separate scenarios are developed for various reformer models in order to investigate the influence of different design parameters on hydrogen production and reformer performance. It is found that, for diesel, adiabatic steam reforming yields outlet temperatures ranging from 973 to 1273 K at pressures between 500 and 1500 kPa, with the highest hydrogen yield achieved at a steam‐to‐carbon ratio of 3.5. Isothermal steam reformers can achieve hydrogen production levels of 70%–80% at temperatures exceeding 1000 K. In the process of partial oxidation, temperatures exceeding 1200 K lead to a notable shift in gas composition, reducing CO from approximately 81% to 68% and increasing CH 4 from around 18% to 32% as the O/C ratio and pressure increase. In contrast, autothermal reformers (ATRs) provide compositions that remain independent of pressure. As the framework is equilibrium‐based, the reported compositions and parametric sensitivities represent thermodynamic upper‐bound trends rather than predictive behavior.

Cite

APA

Çoban, M. T., Genceli, H., Asker, M., Turgut, O. E., & Turgut, M. S. (2026). Thermodynamic Modeling of Hydrogen Fuel Reformers Through Gibbs Energy Minimization. Fuel Cells, 26(2). https://doi.org/10.1002/fuce.70071

Vancouver

Çoban MT, Genceli H, Asker M, Turgut OE, Turgut MS. Thermodynamic Modeling of Hydrogen Fuel Reformers Through Gibbs Energy Minimization. Fuel Cells. 2026;26(2). doi:10.1002/fuce.70071

BibTeX
@article{oban2026,
  author = {Çoban, Mustafa Turhan and Genceli, Hadi and Asker, Mustafa and Turgut, Oguz Emrah and Turgut, Mert Sinan},
  title = {Thermodynamic Modeling of Hydrogen Fuel Reformers Through Gibbs Energy Minimization},
  journal = {Fuel Cells},
  year = {2026},
  volume = {26},
  number = {2},
  doi = {10.1002/fuce.70071}
}
Start for free →