Product Distribution Analysis of Carbon (IV) oxide Hydrogenation Multi-Reaction System Using Gibbs Reactor Model for Direct Gibbs Energy Minimization
International Journal of Scientific Research in Science, Engineering and Technology · 20.06.2026 · 13 (3) · 515-530
DOI: 10.32628/ijsrset2613343 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Scientific Research in Science, Engineering and Technology, online erschienen am 20.06.2026. Verfasst von Abdullahi Nwaha Isah und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Catalytic carbon (IV) oxide (CO2) hydrogenation is considered as an attractive route for chemical conversion of CO2 because of its thermodynamic significance and the ease of release of intrinsic chemical energy of hydrogen. Coupled with the formation of synthetic fuels, value added chemicals like methane, methanol and dimethyl ether etc., are obtained and it serves as mechanism of regulating carbon cycle. In this study, Aspen Plus (V8.8) was used to carry out the thermodynamic analysis of CO2 hydrogenation and direct minimization of Gibbs free energy method was used to investigate the impact of H2/CO2 molar ratio (0.5-3), pressure (1 atm) and reaction temperature(573-1473K) on product distribution at equilibrium. Based on the sensitivity analysis, both CO2 and H2 conversions increase at temperatures above 973K for all molar feed ratios considered, while the maximum equilibrium conversions of the reactants were achieved at 1473K.The depression of carbon formation was noticed as both feed molar ratio and temperature increase and carbon free regime was observed at temperature of 1273K and above. In essence, carbon deposition reactions can be avoided in chemical processes at these temperatures (1273K and above). For all the feed molar ratios, carbon (II) oxide has steadily increased at temperatures above 773K, while maximum rate of methanol formation was notably achieved at temperature range of 880-850K. Synthesis of methanol by direct CO2 hydrogenation is preferable due its minimal by-products, low energy requirement and its usefulness as renewable fuel for fuel cells and internal combustion engines.
Zitieren
APA
Isah, A. N., Eterigho, E. J., Abdulazeez, A. A., Sarki, Y. G., & Mohammed, Y. (2026). Product Distribution Analysis of Carbon (IV) oxide Hydrogenation Multi-Reaction System Using Gibbs Reactor Model for Direct Gibbs Energy Minimization. International Journal of Scientific Research in Science, Engineering and Technology, 13(3), 515-530. https://doi.org/10.32628/ijsrset2613343
Vancouver
Isah AN, Eterigho EJ, Abdulazeez AA, Sarki YG, Mohammed Y. Product Distribution Analysis of Carbon (IV) oxide Hydrogenation Multi-Reaction System Using Gibbs Reactor Model for Direct Gibbs Energy Minimization. International Journal of Scientific Research in Science, Engineering and Technology. 2026;13(3):515-530. doi:10.32628/ijsrset2613343
BibTeX
@article{Isah2026,
author = {Isah, Abdullahi Nwaha and Eterigho, Elizabeth Jumoke and Abdulazeez, Abdulazeez Alhaji and Sarki, Yunusa Gomina and Mohammed, Yasir},
title = {Product Distribution Analysis of Carbon (IV) oxide Hydrogenation Multi-Reaction System Using Gibbs Reactor Model for Direct Gibbs Energy Minimization},
journal = {International Journal of Scientific Research in Science, Engineering and Technology},
year = {2026},
volume = {13},
number = {3},
pages = {515--530},
doi = {10.32628/ijsrset2613343}
}
EUVIMED