EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Nanostructured Anodes for Solid Oxide Fuel Cells Obtained by Screen‐Printing and Infiltration

Martin Michael Juckel, Yanting Liu, André Weber, Olivier Guillon, Norbert H. Menzler

Fuel Cells · 2025-10 · 25 (5)

DOI: 10.1002/fuce.70017 ↗

At a glance

Journal article in Fuel Cells, published online on 2025-09-07. Written by Martin Michael Juckel and 4 co-authors. Cited 1 times so far (Crossref); 33 references. The full text is freely available (open access, CC BY 4.0).

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Nanomaterials were used for the investigation of electrochemical performance tests of solid oxide fuel cells. Two different approaches were chosen to produce symmetrical nanoparticle (NP)‐based cells: screen printing and infiltration. Screen printing, as a state‐of‐the‐art manufacturing process, leads to unstable NiO/gadolinium‐doped ceria (GDC) conductive layers, which either show delamination or flaking after sintering or electrochemical testing. The infiltration of an NiO scaffold with GDC NPs and the infiltration of a GDC scaffold with NiO NPs, on the other hand, were used as a solution for these problems, and stable symmetrical cells with particle sizes down to 10 nm were produced. All stable infiltrated cells were microstructurally and electrochemically characterized and showed an improved electrochemical performance.

Cite

APA

Juckel, M. M., Liu, Y., Weber, A., Guillon, O., & Menzler, N. H. (2025). Nanostructured Anodes for Solid Oxide Fuel Cells Obtained by Screen‐Printing and Infiltration. Fuel Cells, 25(5). https://doi.org/10.1002/fuce.70017

Vancouver

Juckel MM, Liu Y, Weber A, Guillon O, Menzler NH. Nanostructured Anodes for Solid Oxide Fuel Cells Obtained by Screen‐Printing and Infiltration. Fuel Cells. 2025;25(5). doi:10.1002/fuce.70017

BibTeX
@article{Juckel2025,
  author = {Juckel, Martin Michael and Liu, Yanting and Weber, André and Guillon, Olivier and Menzler, Norbert H.},
  title = {Nanostructured Anodes for Solid Oxide Fuel Cells Obtained by Screen‐Printing and Infiltration},
  journal = {Fuel Cells},
  year = {2025},
  volume = {25},
  number = {5},
  doi = {10.1002/fuce.70017}
}
Start for free →