EUVIMEDEUVIMED entdecken
Crossref

Temperature‐controlled microextrusion printing for mesoscale interfacial designing in solid oxide fuel cells

Cheng Ding, Haewon Seo, Masashi Kishimoto, Hiroshi Iwai

Fuel Cells · 2023-06 · 23 (3) · 264-272

DOI: 10.1002/fuce.202200170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fuel Cells, online erschienen am 25.06.2023. Verfasst von Cheng Ding und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science, Japan Science and Technology Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A temperature‐controlled microextrusion printing technique is proposed to realize the increased aspect ratio of mesoscale convex structures at the anode–electrolyte interface in solid oxide fuel cells (SOFCs). The rheological properties of the anode ink for microextrusion printing are experimentally measured at various temperatures, and it is found that the viscosity of the ink and the wettability of the ink to the anode substrate decrease at lower temperatures, which is desirable for the ink to retain its shape on the substrate. The anode‐supported SOFC button cells are fabricated by microextrusion printing with and without temperature control and compared in terms of their interfacial structures and electrochemical performance. The aspect ratio of the interfacial structure is increased from 0.16 to 0.28 by lowering the ink temperature, resulting in a higher interface enlargement of 25%. Owing to the enlarged interfacial area, enhanced cell performance is also achieved.

Förderung

  • Japan Society for the Promotion of Science
  • Japan Science and Technology Agency

Zitieren

APA

Ding, C., Seo, H., Kishimoto, M., & Iwai, H. (2023). Temperature‐controlled microextrusion printing for mesoscale interfacial designing in solid oxide fuel cells. Fuel Cells, 23(3), 264-272. https://doi.org/10.1002/fuce.202200170

Vancouver

Ding C, Seo H, Kishimoto M, Iwai H. Temperature‐controlled microextrusion printing for mesoscale interfacial designing in solid oxide fuel cells. Fuel Cells. 2023;23(3):264-272. doi:10.1002/fuce.202200170

BibTeX
@article{Ding2023,
  author = {Ding, Cheng and Seo, Haewon and Kishimoto, Masashi and Iwai, Hiroshi},
  title = {Temperature‐controlled microextrusion printing for mesoscale interfacial designing in solid oxide fuel cells},
  journal = {Fuel Cells},
  year = {2023},
  volume = {23},
  number = {3},
  pages = {264--272},
  doi = {10.1002/fuce.202200170}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche