EUVIMEDEUVIMED entdecken
Crossref

Insights Into a Novel Asymmetric T‐Type Microdroplet Mixer in the Microfluidic Chip With Tunable Shrink

Junsheng Wang, Bing Yang, Qing Yu, Qiaoyu Feng, Haoxin Jia, Kai Zhao

ELECTROPHORESIS · 2025-11 · 46 (22) · 1630-1640

DOI: 10.1002/elps.70035 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ELECTROPHORESIS, online erschienen am 20.09.2025. Verfasst von Junsheng Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Liaoning Key Laboratory of Marine Sensing and Intelligent Detection, Dalian Maritime University, Dalian, China. Hauptthemen laut MEDLINE: Microfluidic Analytical Techniques. Die Arbeit nennt 38 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel microdroplet mixer is proposed by combining the asymmetric offset structure with tunable shrink in the microfluidic chip. The mixer consists of a coaxial flow region in the dispersed‐phase channel and an asymmetrical offset aggregation region in the downstream channel, which shortens the mass transfer distance between the solutions to be mixed through the “sandwich” type of initial distribution, and utilizes the tunable shrink to reduce the shear force and break the symmetric vortex during the generation of the microdroplets, prolonging the pre‐mixing time. Through finite element simulation, the effects of dispersed‐phase flow velocity, continuous‐phase flow velocity, the relative angles and offset distances between the continuous and dispersed‐phases, and the necking width and length of the tunable shrink on the mixing efficiency inside the droplets were investigated. The internal mixing inside the microdroplet decrease with the dispersed‐phase flow velocity, whereas the increase of the continuous‐phase flow velocity favors the mixing enhancement. By optimizing the above‐mentioned effects, the mixing efficiency achieves as high as approximately 97%, demonstrating the excellent mixing inside the microdroplets in the novel asymmetric micromixer. The proposed microdroplet mixer illustrates advantages of rapid mixing, simple patterned geometry, and easy to fabricate, demonstrating a promising technique for flexibly fluid mixing inside the microdroplet on a microfluidic chip.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Microfluidic Analytical TechniquesEquipment DesignComputer SimulationFinite Element Analysis

Stichwörter der Autor:innen

asymmetric geometry | microdroplet mixer | microfluidics | rapid mixing

Autor:innen und Institutionen

  • Liaoning Key Laboratory of Marine Sensing and Intelligent Detection, Dalian Maritime University, Dalian, China.
  • Department of Information Science and Technology, Dalian Maritime University, Dalian, China.

Zitieren

APA

Wang, J., Yang, B., Yu, Q., Feng, Q., Jia, H., & Zhao, K. (2025). Insights Into a Novel Asymmetric T‐Type Microdroplet Mixer in the Microfluidic Chip With Tunable Shrink. ELECTROPHORESIS, 46(22), 1630-1640. https://doi.org/10.1002/elps.70035

Vancouver

Wang J, Yang B, Yu Q, Feng Q, Jia H, Zhao K. Insights Into a Novel Asymmetric T‐Type Microdroplet Mixer in the Microfluidic Chip With Tunable Shrink. ELECTROPHORESIS. 2025;46(22):1630-1640. doi:10.1002/elps.70035

BibTeX
@article{Wang2025,
  author = {Wang, Junsheng and Yang, Bing and Yu, Qing and Feng, Qiaoyu and Jia, Haoxin and Zhao, Kai},
  title = {Insights Into a Novel Asymmetric T‐Type Microdroplet Mixer in the Microfluidic Chip With Tunable Shrink},
  journal = {ELECTROPHORESIS},
  year = {2025},
  volume = {46},
  number = {22},
  pages = {1630--1640},
  doi = {10.1002/elps.70035}
}
Kostenlos starten →