EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY-NC 4.0

Comparing Different Light Models for Virtual Electrodes in Optoelectronic Tweezers

Ernesto Guzman-Saleh, Victor H Perez-Gonzalez, Rodrigo Martinez-Duarte

ELECTROPHORESIS · 2025

DOI: 10.1002/elps.8131 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift ELECTROPHORESIS, 2025. Verfasst von Ernesto Guzman-Saleh und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering and Sciences, Tecnologico de Monterrey, Monterrey, Nuevo Leon, Mexico. Hauptthemen laut MEDLINE: Optical Tweezers, Models, Theoretical, Electrophoresis, Microfluidic Analytical Techniques. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Tecnologico de Monterrey through the Nano-Sensors & Devices Research Group, Federico Baur Endowed Chair in Nanotechnology, Consejo Nacional de Humanidades, Ciencia y Tecnología.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optoelectronic tweezers (OET) allow for the physical manipulation of particles of interest via dielectrophoresis (DEP) in microfluidic devices. To produce the nonuniform electric field required to enable DEP, light is used to expose a photoconductive film and create a so‐called virtual electrode (VE). Several attempts have been made to model the light profile used to excite the photoconductive layer and produce the VE. However, no comparison of the models has been presented in the literature. Here, we present a comparative study among the rectangular, Gaussian, and saturated‐Gaussian models in mapping to light profiles obtained experimentally. These models were then used to predict the activation of a VE and the distribution of the electric field in an OET system. From this comparison, it is possible to conclude that the saturated‐Gaussian model should be the preferred choice to study these systems. Moreover, VEs were also compared numerically to conventional gold electrodes used regularly in DEP applications, concluding that very relevant differences exist between the electric fields produced by these two types of electrodes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Optical TweezersModels, TheoreticalElectrophoresisMicrofluidic Analytical TechniquesElectrodesLightNormal DistributionEquipment DesignComputer Simulation

Stichwörter der Autor:innen

light‐induced dielectrophoresisoptically induced dielectrophoresisoptoelectronic tweezersphotoconductivevirtual electrodes

Autor:innen und Institutionen

  • School of Engineering and Sciences, Tecnologico de Monterrey, Monterrey, Nuevo Leon, Mexico.
  • Multiscale Manufacturing Laboratory, Department of Mechanical Engineering, Clemson University, Clemson, South Carolina, USA.

Förderung

  • Tecnologico de Monterrey through the Nano-Sensors & Devices Research Group
  • Federico Baur Endowed Chair in Nanotechnology
  • Consejo Nacional de Humanidades, Ciencia y Tecnología
  • TIGER grant program at Clemson University

Zitieren

APA

Guzman-Saleh, E., Perez-Gonzalez, V. H., & Martinez-Duarte, R. (2025). Comparing Different Light Models for Virtual Electrodes in Optoelectronic Tweezers. ELECTROPHORESIS. https://doi.org/10.1002/elps.8131

Vancouver

Guzman-Saleh E, Perez-Gonzalez VH, Martinez-Duarte R. Comparing Different Light Models for Virtual Electrodes in Optoelectronic Tweezers. ELECTROPHORESIS. 2025. doi:10.1002/elps.8131

BibTeX
@article{GuzmanSaleh2025,
  author = {Guzman-Saleh, Ernesto and Perez-Gonzalez, Victor H and Martinez-Duarte, Rodrigo},
  title = {Comparing Different Light Models for Virtual Electrodes in Optoelectronic Tweezers},
  journal = {ELECTROPHORESIS},
  year = {2025},
  doi = {10.1002/elps.8131}
}
Kostenlos starten →