Engineering Li + Transport Pathways via Mechanical Hole Patterning in Dry Thick Graphite Anodes
EcoEnergy · 2026-11-21
DOI: 10.1002/ece2.70190 ↗At a glance
Journal article in EcoEnergy, published online on 2026-11-21. Written by Minsung Kim and 6 co-authors. 56 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Trade, Industry and Energy, National Research Foundation.
Abstract (original language)
Dry thick electrodes offer a promising route to high‐energy‐density lithium‐ion batteries; however, increasing electrode thickness requires Li + to migrate over a longer distance through the pore network, leading to severe concentration polarization under high‐rate operation. Here, we introduce probe‐based mechanical hole patterning as a Li + transport pathway engineering strategy for dry thick graphite anodes (∼7 mAh cm −2 ). Deformation‐energy and tribological analyses as a function of penetration depth identify a processing window in which continuous Li + pathways are formed whereas stress‐induced particle fracture and local densification are suppressed. This processing window indicates that effective hole patterning is not governed by simply increasing the penetration depth, but by balancing Li + pathway reconstruction with pore–network integrity. The controlled dry thick graphite anode achieves constant‐current lithiation capacities of 103.3 and 22.7 mAh g −1 at 1C and 2C‐rates, corresponding to improvements of 36.7% and 65.2%, respectively, compared with the pristine anode. In addition, the bottom‐to‐top relative Li signal ratio increases from 13.6% for the pristine anode to 53.3% for the controlled anode, confirming enhanced Li + transport through the thick anode. Overall, these findings demonstrate that mechanical design guideline for probe‐based hole patterning in dry thick electrodes requires a balance among Li + pathway reconstruction, structural preservation, and interfacial stability.
Funding
- Ministry of Trade, Industry and Energy
- National Research Foundation
Cite
APA
Kim, M., Park, S., Kim, J., Ha, J., Cho, C., Song, T., & Paik, U. (2026). Engineering Li + Transport Pathways via Mechanical Hole Patterning in Dry Thick Graphite Anodes. EcoEnergy. https://doi.org/10.1002/ece2.70190
Vancouver
Kim M, Park S, Kim J, Ha J, Cho C, Song T, et al. Engineering Li + Transport Pathways via Mechanical Hole Patterning in Dry Thick Graphite Anodes. EcoEnergy. 2026. doi:10.1002/ece2.70190
BibTeX
@article{Kim2026,
author = {Kim, Minsung and Park, Sejin and Kim, Jiwoon and Ha, Jaehwan and Cho, Chae‐Woong and Song, Taeseup and Paik, Ungyu},
title = {Engineering Li + Transport Pathways via Mechanical Hole Patterning in Dry Thick Graphite Anodes},
journal = {EcoEnergy},
year = {2026},
doi = {10.1002/ece2.70190}
}
EUVIMED