EUVIMEDAtrasti EUVIMED
Open access

Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes

Bruna F Soares iD, Francisco Cunha iD, Henrique Santos iD, Clara Parreirão, Márcia C Neves iD, Mara G Freire iD, Isabel M Marrucho iD

ChemSusChem · 2026-08-14 · 19 (15)

DOI: 10.1002/cssc.70922 ↗

At a glance

Journal article in ChemSusChem, published online on 2026-07-28. Written by Bruna F Soares and 6 co-authors. Institution: Departamento de Engenharia Química e Centro de Química Estrutural, Instituto Superior de Lisboa, Universidade de Lisboa, Lisboa, Portugal. 39 references. The full text is freely available in PubMed Central. Funded by: Fundação para a Ciência e a Tecnologia.

SantraukaSubjectsBibliografiniai duomenysCiteRelated studies

Abstract (original language)

This work investigates two fabrication strategies, solvent casting and spray‐coating, for producing advanced IL‐based mixed‐matrix membranes (MMMs) incorporating functionalized silica IL (SiIL) microparticles, [Si][C 3 C 1 im]Cl. Membranes with 20 wt% of poly(diallyldimethylammonium) bis(trifluoromethylsulfonyl)imide, poly[pyr 11 ][NTf 2 ], PIL and 80 wt% of 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, ([C 2 mim][NTf 2 ]), IL with varying filler loadings were evaluated for CO 2 separation performance, including gas permeance, permeability, diffusivity, solubility, and CO 2 /N 2 selectivity. Spray‐coating enabled the formation of ultrathin, selective layers, resulting in CO 2 permeances up to 27 GPU, approximately twice than without silica and up to ten times higher than solvent‐cast samples, while maintaining selectivity values, between 29 and 40. In contrast, solvent‐cast membranes exhibited lower CO 2 permeances (2–3 GPU) but benefited from uniform filler dispersion, achieving a 63% increase in CO 2 permeability at optimal SiIL loadings. Mixed‐gas experiments (15% CO 2 and 85% N 2 ) demonstrated that spray‐coated membranes retained most of their performance under competitive conditions, with CO 2 permeance losses of only 5%–9%, whereas solvent‐cast membranes showed more stable selectivity but lower overall flux. These results highlight that membrane fabrication methodology, rather than filler content alone, critically determines the membrane architecture and thus gas transport behavior. Overall, spray‐coating emerges as a highly effective approach to designing scalable, high‐performance MMMs for industrial CO 2 separation applications.

Subjects

Author keywords

carbon dioxide separationfunctionalized particlesionic liquidsmixed‐matrix membranesspray‐coating

Authors and institutions

  • Departamento de Engenharia Química e Centro de Química Estrutural, Instituto Superior de Lisboa, Universidade de Lisboa, Lisboa, Portugal.
  • Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal.

ORCID profiles: Bruna F Soares, Francisco Cunha, Henrique Santos, Márcia C Neves, Mara G Freire, Isabel M Marrucho

Funding

  • Fundação para a Ciência e a Tecnologia

Cite

APA

Soares, B. F., Cunha, F., Santos, H., Parreirão, C., Neves, M. C., Freire, M. G., & Marrucho, I. M. (2026). Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes. ChemSusChem, 19(15). https://doi.org/10.1002/cssc.70922

Vancouver

Soares BF, Cunha F, Santos H, Parreirão C, Neves MC, Freire MG, et al. Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes. ChemSusChem. 2026;19(15). doi:10.1002/cssc.70922

BibTeX
@article{Soares2026,
  author = {Soares, Bruna F and Cunha, Francisco and Santos, Henrique and Parreirão, Clara and Neves, Márcia C and Freire, Mara G and Marrucho, Isabel M},
  title = {Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {15},
  doi = {10.1002/cssc.70922}
}
Start for free →