Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes
ChemSusChem · 14.08.2026 · 19 (15)
DOI: 10.1002/cssc.70922 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 28.07.2026. Verfasst von Bruna F Soares und 6 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Engenharia Química e Centro de Química Estrutural, Instituto Superior de Lisboa, Universidade de Lisboa, Lisboa, Portugal. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
This work investigates two fabrication strategies, solvent casting and spray‐coating, for producing advanced IL‐based mixed‐matrix membranes (MMMs) incorporating functionalized silica IL (SiIL) microparticles, [Si][C 3 C 1 im]Cl. Membranes with 20 wt% of poly(diallyldimethylammonium) bis(trifluoromethylsulfonyl)imide, poly[pyr 11 ][NTf 2 ], PIL and 80 wt% of 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, ([C 2 mim][NTf 2 ]), IL with varying filler loadings were evaluated for CO 2 separation performance, including gas permeance, permeability, diffusivity, solubility, and CO 2 /N 2 selectivity. Spray‐coating enabled the formation of ultrathin, selective layers, resulting in CO 2 permeances up to 27 GPU, approximately twice than without silica and up to ten times higher than solvent‐cast samples, while maintaining selectivity values, between 29 and 40. In contrast, solvent‐cast membranes exhibited lower CO 2 permeances (2–3 GPU) but benefited from uniform filler dispersion, achieving a 63% increase in CO 2 permeability at optimal SiIL loadings. Mixed‐gas experiments (15% CO 2 and 85% N 2 ) demonstrated that spray‐coated membranes retained most of their performance under competitive conditions, with CO 2 permeance losses of only 5%–9%, whereas solvent‐cast membranes showed more stable selectivity but lower overall flux. These results highlight that membrane fabrication methodology, rather than filler content alone, critically determines the membrane architecture and thus gas transport behavior. Overall, spray‐coating emerges as a highly effective approach to designing scalable, high‐performance MMMs for industrial CO 2 separation applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Engenharia Química e Centro de Química Estrutural, Instituto Superior de Lisboa, Universidade de Lisboa, Lisboa, Portugal.
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal.
ORCID-Profile: Bruna F Soares, Francisco Cunha, Henrique Santos, Márcia C Neves, Mara G Freire, Isabel M Marrucho
Förderung
- Fundação para a Ciência e a Tecnologia
Zitieren
APA
Soares, B. F., Cunha, F., Santos, H., Parreirão, C., Neves, M. C., Freire, M. G., & Marrucho, I. M. (2026). Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes. ChemSusChem, 19(15). https://doi.org/10.1002/cssc.70922
Vancouver
Soares BF, Cunha F, Santos H, Parreirão C, Neves MC, Freire MG, et al. Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes. ChemSusChem. 2026;19(15). doi:10.1002/cssc.70922
BibTeX
@article{Soares2026,
author = {Soares, Bruna F and Cunha, Francisco and Santos, Henrique and Parreirão, Clara and Neves, Márcia C and Freire, Mara G and Marrucho, Isabel M},
title = {Advancing Ionic Liquid‐Based Membrane Fabrication: Spray‐Coating as a Pathway for Mixed‐Matrix Membranes},
journal = {ChemSusChem},
year = {2026},
volume = {19},
number = {15},
doi = {10.1002/cssc.70922}
}
EUVIMED