Nickel‐Coated Copper Foam Electrocatalytic Electrode for Energy‐Saving Hydrogen Evolution and Value‐Added Chemical Cogeneration
ChemSusChem · 2025-10 · 18 (19)
DOI: 10.1002/cssc.202501065 ↗At a glance
Journal article in ChemSusChem, published online on 2025-09-10. Written by Muhammad Wasim and 9 co-authors. Institution: College of Civil and Transportation Engineering, Shenzhen University, Shenzhen, Guangdong, 518055, China. Cited 4 times so far (Crossref); 57 references. Funded by: National Natural Science Foundation of China, Shenzhen Science and Technology Innovation Program, Shenzhen Science and Technology Innovation Project.
Abstract (original language)
Developing cost‐effective, eco‐friendly electrocatalysts is essential for enhanced water electrolysis. The efficient, affordable, and earth‐abundant electrocatalysts like 3D copper foam (CuF) provide ideal porous structures for rapid ion transport during water electrolysis. In this study, a bimetallic foam architecture (CuF@Ni) is fabricated by electrodeposition of Ni on CuF. This structure acts as both conductive support and active catalyst during the water electrolysis process. The synthesized CuF@Ni demonstrated superior hydrogen evolution reaction (HER) activity with an overpotential of 0.18 V at 50 mA cm −2 , while the methanol oxidation reaction (MOR) overpotential exhibits 0.14 V at 50 mA cm −2 current density. CuF@Ni electrocatalytic electrode achieved a Faradaic efficiency ≈100% during 150 C charge transfer. In a co‐generation system, the onset potential is observed as lower 0.4 V, and CuF@Ni required only 0.92 V to sustain the current density of 50 mA cm −2 , demonstrating significant energy savings. Furthermore, this device consumes less power than theoretical water electrolysis under higher current density. The electrochemical stability of 100 h and 120 h achieved for HER and MOR, respectively, confirmed minimal degradation under the harsh conditions. This study highlights CuF@Ni as a promising dual‐functional electrocatalyst for efficient energy conversion and future renewable energy applications.
Subjects
Author keywords
Authors and institutions
- College of Civil and Transportation Engineering, Shenzhen University, Shenzhen, Guangdong, 518055, China.
- Shenzhen Key Laboratory of Energy Electrocatalytic Materials, Guangdong Provincial Key Laboratory of New Energy Materials Service Safety, College of Materials Science and Engineering, Shenzhen University, Shenzhen, Guan…
- Department of Soil and Environmental Science, Muhammad Nawaz Sharif University of Agriculture, Multan, 60000, Pakistan.
ORCID profiles: Xian-Zhu Fu, Jing-Li Luo
Funding
- National Natural Science Foundation of China
- Shenzhen Science and Technology Innovation Program
- Shenzhen Science and Technology Innovation Project
Cite
APA
Wasim, M., Tayyab, M., Arbab, A., Zeeshan Khan, A., Zafar, Z., Arshad, M., Javed, R., Liaqat, M., Fu, X. Z., & Luo, J. L. (2025). Nickel‐Coated Copper Foam Electrocatalytic Electrode for Energy‐Saving Hydrogen Evolution and Value‐Added Chemical Cogeneration. ChemSusChem, 18(19). https://doi.org/10.1002/cssc.202501065
Vancouver
Wasim M, Tayyab M, Arbab A, Zeeshan Khan A, Zafar Z, Arshad M, et al. Nickel‐Coated Copper Foam Electrocatalytic Electrode for Energy‐Saving Hydrogen Evolution and Value‐Added Chemical Cogeneration. ChemSusChem. 2025;18(19). doi:10.1002/cssc.202501065
BibTeX
@article{Wasim2025,
author = {Wasim, Muhammad and Tayyab, Muhammad and Arbab, Ali and Zeeshan Khan, Abdul and Zafar, Zulakha and Arshad, Muhammad and Javed, Rida and Liaqat, Maira and Fu, Xian-Zhu and Luo, Jing-Li},
title = {Nickel‐Coated Copper Foam Electrocatalytic Electrode for Energy‐Saving Hydrogen Evolution and Value‐Added Chemical Cogeneration},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {19},
doi = {10.1002/cssc.202501065}
}
EUVIMED