Electrocatalytic Glycerol Conversion: A Low-Voltage Pathway to Efficient Carbon-Negative Green Hydrogen and Value-Added Chemical Production
ACS Applied Materials & Interfaces · 22.05.2024 · 16 (20) · 26130-26141
DOI: 10.1021/acsami.4c02392 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 08.05.2024. Verfasst von Inderjeet Chauhan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Catalysis and Inorganic Chemistry Division, CSIR-National Chemical Laboratory, Dr. Homi Bhabha Road, Pune 411 008, India. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: University Grants Commission, Department of Science and Technology, Ministry of Science and Technology, India, National Chemical Laboratory.
Abstract (Originalsprache)
Electrochemical glycerol oxidation reaction (GLYOR) could be a promising way to use the abundantly available glycerol for production of value-added chemicals and fuels. Completely avoiding the oxygen evolution reaction (OER) with GLYOR is an evolving strategy to reduce the overall cell potential and generate value-added chemicals and fuels on both the anode and cathode. We demonstrate the morphology-controlled palladium nanocrystals, afforded by colloidal chemistry, and their established morphology-dependent GLYOR performance. Although it is known that controlling the morphology of an electrocatalyst can modulate the activity and selectivity of the products, still it is a relatively underexplored area for many reactions, including GLYOR. Among nanocube (Pd-NC), truncated octahedron (Pd-TO), spherical and polycrystalline (Pd-PC) morphologies, the Pd-NC electrocatalyst deposited on a Ni foam exhibits the highest glycerol conversion (85%) along with 42% glyceric acid selectivity at a low applied potential of 0.6 V (vs reversible hydrogen electrode (RHE)) in 0.1 M glycerol and 1 M KOH at ambient temperature. Owing to the much favorable thermodynamics of GLYOR on the Pd-NC surface, the assembled electrolyzer requires an electricity input of only ∼3.7 kWh/m3 of H2 at a current density of 100 mA/cm2, in contrast to the requirement of ≥5 kWh/m3 of H2 with an alkaline/PEM electrolyzer. Sustainability has been successfully demonstrated at 10 and 50 mA/cm2 and up to 120 h with GLYOR in water and simulated seawater.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Catalysis and Inorganic Chemistry Division, CSIR-National Chemical Laboratory, Dr. Homi Bhabha Road, Pune 411 008, India.
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201 002, India.
- Department of Applied Physics, Defence Institute of Advanced Technology (Deemed University), Girinagar, Pune 411 025, India.
ORCID-Profile: Bishakha Ray, Sadhu K Kolekar, Kshirodra Kumar Patra, Chinnakonda S Gopinath
Förderung
- University Grants Commission
- Department of Science and Technology, Ministry of Science and Technology, India
- National Chemical Laboratory
Zitieren
APA
Chauhan, I., Bajpai, H., Ray, B., Kolekar, S. K., Datar, S., Patra, K. K., & Gopinath, C. S. (2024). Electrocatalytic Glycerol Conversion: A Low-Voltage Pathway to Efficient Carbon-Negative Green Hydrogen and Value-Added Chemical Production. ACS Applied Materials & Interfaces, 16(20), 26130-26141. https://doi.org/10.1021/acsami.4c02392
Vancouver
Chauhan I, Bajpai H, Ray B, Kolekar SK, Datar S, Patra KK, et al. Electrocatalytic Glycerol Conversion: A Low-Voltage Pathway to Efficient Carbon-Negative Green Hydrogen and Value-Added Chemical Production. ACS Applied Materials & Interfaces. 2024;16(20):26130-26141. doi:10.1021/acsami.4c02392
BibTeX
@article{Chauhan2024,
author = {Chauhan, Inderjeet and Bajpai, Himanshu and Ray, Bishakha and Kolekar, Sadhu K and Datar, Suwarna and Patra, Kshirodra Kumar and Gopinath, Chinnakonda S},
title = {Electrocatalytic Glycerol Conversion: A Low-Voltage Pathway to Efficient Carbon-Negative Green Hydrogen and Value-Added Chemical Production},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {20},
pages = {26130--26141},
doi = {10.1021/acsami.4c02392}
}
EUVIMED