Effect of ceramic materials and tooth preparation design on computer‐aided design and computer‐aided manufacturing endocrown adaptation and retentive strength: An in vitro study
Clinical and Experimental Dental Research · 2024-02 · 10 (1)
DOI: 10.1002/cre2.843 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, online erschienen am 31.01.2024. Verfasst von Ahmed Farghal und 6 weiteren Autor:innen. Beteiligte Einrichtung: Substitutive Dental Science, College of Dentistry, Taibah University, Madinah, Saudi Arabia. Hauptthemen laut MEDLINE: Crowns, Dental Prosthesis Design, Zirconium. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: None.
Abstract (Originalsprache)
Objectives
To evaluate how various tooth preparation designs impact the adaptation—both at the margins and internally—and the retentive strength of computer‐aided design and computer‐aided manufacturing (CAD/CAM) produced endocrowns. Materials and Methods 60 extracted human mandibular first molars were endodontically treated and assigned into three groups ( n = 20) according to the tooth preparation design: Group N: butt joint design, Group F and F1 received 1‐ and 2‐mm circumferential ferrule preparation, respectively. Endocrowns were milled using either lithium disilicate glass‐ceramic (IPS emax ceramic) or monolithic zirconia. The internal and marginal adaptation of the endocrowns were evaluated using the replica technique. After cementation, the endocrowns of all test groups were dislodged axially at 0.5 mm/min using a universal testing machine. A 2‐way ANOVA and the independent samples t‐test (α = .05) were performed to statistically analyze the data.
Results
The effect of changing the design of the tooth preparation (butt joint, ferrule) on the marginal and internal gap was shown to be statistically significant ( p < .05); the lower gap values were recorded at the axial followed by cervical, marginal, and pulpal floor walls in both ceramic groups regardless of the teeth preparation design. The ANOVA test revealed similar average removal forces and stresses for the two types of tested ceramic materials.
Conclusion
IPS emax ceramic adapted better than monolithic zirconia ceramic, regardless of the preparation design. Ferrule preparation design is more retentive than butt joint preparation, regardless of the type of ceramic material used.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Substitutive Dental Science, College of Dentistry, Taibah University, Madinah, Saudi Arabia.
- Crown and Bridge Department, Faculty of Dental Medicine, Al-Azhar University, Cairo, Egypt.
- Fixed Prosthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt.
- Prosthodontic Department, Faculty of Dentistry, Ibb University, Ibb, Yemen.
- Prosthodontic Department, Faculty of Dentistry, National University, Ibb branch, Ibb, Yemen.
ORCID-Profile: Radwan Algabri, Ahmed Yaseen Alqutaibi
Förderung
- None
Zitieren
APA
Farghal, A., Dewedar, K., AbdElaziz, M. H., Saker, S., Hassona, M., Algabri, R., & Alqutaibi, A. Y. (2024). Effect of ceramic materials and tooth preparation design on computer‐aided design and computer‐aided manufacturing endocrown adaptation and retentive strength: An in vitro study. Clinical and Experimental Dental Research, 10(1). https://doi.org/10.1002/cre2.843
Vancouver
Farghal A, Dewedar K, AbdElaziz MH, Saker S, Hassona M, Algabri R, et al. Effect of ceramic materials and tooth preparation design on computer‐aided design and computer‐aided manufacturing endocrown adaptation and retentive strength: An in vitro study. Clinical and Experimental Dental Research. 2024;10(1). doi:10.1002/cre2.843
BibTeX
@article{Farghal2024,
author = {Farghal, Ahmed and Dewedar, Karim and AbdElaziz, Mohammed H and Saker, Samah and Hassona, Mahy and Algabri, Radwan and Alqutaibi, Ahmed Yaseen},
title = {Effect of ceramic materials and tooth preparation design on computer‐aided design and computer‐aided manufacturing endocrown adaptation and retentive strength: An in vitro study},
journal = {Clinical and Experimental Dental Research},
year = {2024},
volume = {10},
number = {1},
doi = {10.1002/cre2.843}
}
EUVIMED