EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Air Polishing and Ultrasonics on Veneer Margins in Vitro: An Optical Coherence Tomography Pilot Study

Julia Moeller, Tobias Meissner, Florian Fuchs, Andreas Koenig, Sebastian Hahnel, Laura Antonia Mayer, Lena Unterschuetz, Nadia Oberueck, Rainer Haak iD, Dirk Ziebolz, Ellen Schulz-Kornas iD

Clinical and Experimental Dental Research · 2026

DOI: 10.1002/cre2.70407 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, 2026. Verfasst von Julia Moeller und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cariology, Endodontology and Periodontology, Leipzig University, Leipzig, Germany. Hauptthemen laut MEDLINE: Tomography, Optical Coherence, Dental Veneers, Dental Polishing, Ultrasonics. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Free State of Saxony, European Regional Development Fund, Freistaat Sachsen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

In vitro evaluation of substance loss at the restoration margin of veneers was conducted as a function of prophylaxis procedures, air polishing, or ultrasonic instrumentation. Materials and Methods Forty‐eight extracted premolars were restored with CAD/CAM materials after veneer preparation ( t 0 ): lithium disilicate, zirconia‐reinforced lithium silicate ceramics, and resin‐based composite. Five cycles of prophylaxis treatment (air polishing or ultrasonic scaling) and thermocycling ( t E ) were conducted. The substance loss of the luting material at the restoration margin was evaluated regarding width, depth, and the veneer inclination angle using optical coherence tomography and contour analysis. Group differences were determined using two‐factor analysis of variance, Tukey tests, and linear regression models.

Results

Both prophylaxis procedures lead to substance loss at the restoration margin. The material choice had a significant effect on width and depth at the veneer margin ( p < 0.002), this was not observed for the prophylaxis procedures ( p ≥ 0.445). Air polishing resulted in the largest reduction in width and depth in zirconia‐reinforced lithium silicate. A cross‐group influence of inclination angle on substance loss was not detected.

Conclusions

Both prophylactic procedures cause substance loss at the margins of the investigated CAD/CAM ceramic as well as composite veneers in the area of adhesive bonding. Clinical Significance The choice of luting and veneer material seems to have a more significant influence on the extent of substance loss than the type of instrumentation of the prophylaxis procedure.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tomography, Optical CoherenceDental VeneersDental PolishingUltrasonicsHumansPilot ProjectsZirconiumDental PorcelainBicuspidComposite ResinsComputer-Aided DesignCeramicsIn Vitro Techniques

Stichwörter der Autor:innen

hybrid ceramiclithium disilicateoptical coherence tomographyprophylaxis treatmentzirconia‐reinforced lithiumsilicate

Substanzen

Zirconiumlithia disilicatezirconium oxideDental PorcelainComposite Resins

Autor:innen und Institutionen

  • Department of Cariology, Endodontology and Periodontology, Leipzig University, Leipzig, Germany.
  • Department of Prosthodontics and Materials Science, Leipzig University, Leipzig, Germany.
  • Department of Prosthetic Dentistry and Dental Material Science, Regensburg University, Regensburg, Germany.
  • Department of Conservative Dentistry and Periodontology, Brandenburg Medical School Theodor Fontane (MHB), Brandenburg an der Havel, Germany.
  • Institute of General Medicine, Leipzig University, Leipzig, Germany.

ORCID-Profile: Rainer Haak, Ellen Schulz-Kornas

Förderung

  • Free State of Saxony
  • European Regional Development Fund
  • Freistaat Sachsen

Zitieren

APA

Moeller, J., Meissner, T., Fuchs, F., Koenig, A., Hahnel, S., Mayer, L. A., Unterschuetz, L., Oberueck, N., Haak, R., Ziebolz, D., & Schulz-Kornas, E. (2026). Influence of Air Polishing and Ultrasonics on Veneer Margins in Vitro: An Optical Coherence Tomography Pilot Study. Clinical and Experimental Dental Research. https://doi.org/10.1002/cre2.70407

Vancouver

Moeller J, Meissner T, Fuchs F, Koenig A, Hahnel S, Mayer LA, et al. Influence of Air Polishing and Ultrasonics on Veneer Margins in Vitro: An Optical Coherence Tomography Pilot Study. Clinical and Experimental Dental Research. 2026. doi:10.1002/cre2.70407

BibTeX
@article{Moeller2026,
  author = {Moeller, Julia and Meissner, Tobias and Fuchs, Florian and Koenig, Andreas and Hahnel, Sebastian and Mayer, Laura Antonia and Unterschuetz, Lena and Oberueck, Nadia and Haak, Rainer and Ziebolz, Dirk and Schulz-Kornas, Ellen},
  title = {Influence of Air Polishing and Ultrasonics on Veneer Margins in Vitro: An Optical Coherence Tomography Pilot Study},
  journal = {Clinical and Experimental Dental Research},
  year = {2026},
  doi = {10.1002/cre2.70407}
}
Kostenlos starten →