Evaluation of Bone Density for Primary Implant Stability Using a Newly Designed Drill: An In Vitro Study on Polyurethane Bone Blocks
Clinical and Experimental Dental Research · 2024-12 · 10 (6)
DOI: 10.1002/cre2.70048 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, online erschienen am 28.11.2024. Verfasst von Kaien Wakamatsu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Advanced Prosthodontics, Hiroshima University Graduate School of Biomedical and Health Sciences, Hiroshima, Japan. Hauptthemen laut MEDLINE: Torque, Polyurethanes, Bone Density, Dental Implants. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This research was supported following a collaborative research agreement with Hiroshima University and NSK Nakanishi Corporation (A2100628)..
Abstract (Originalsprache)
Objectives
Bone density is an important factor for long‐term implant success. Peri‐implant bone density evaluation before implant placement can be useful for treatment planning, such as the selection of proper implant size or drilling protocol in each case. In this study, we aimed to establish an objective intraoperative bone density evaluation method by measuring the drilling torque value using a newly designed density measurement drill. Materials and Methods Drilling torque value measurement was performed intraoperatively using three types of drills; two previously reported drills and a newly designed drill as a density measurement drill. Polyurethane bone blocks of different densities (D1–D4) were used in this experiment. After the measurement, implants were inserted based on the scheduled plan, and insertion torque (IT) and implant stability quotient (ISQ) were measured to assess primary implant stability.
Results
The drilling torque value increased with the bone blocks' density, and there were significant differences among different densities in all groups ( p < 0.05). The drilling torque value showed a positive correlation with IT in all groups ( p < 0.05). In addition, the drilling torque value increased with the increase in ISQ in all groups.
Conclusions
Within the limitations of this study, a newly designed density measurement drill was able to classify D1–D4 in polyurethane bone blocks despite its narrow diameter, and an objective intraoperative bone evaluation can be achieved. An intraoperative assessment of the drilling torque value can predict primary implant stability and provide valuable information for intraoperative treatment planning, such as undersized drilling protocol and implant size change.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Advanced Prosthodontics, Hiroshima University Graduate School of Biomedical and Health Sciences, Hiroshima, Japan.
ORCID-Profile: Kazuya Doi, Kazuhiro Tsuga
Förderung
- This research was supported following a collaborative research agreement with Hiroshima University and NSK Nakanishi Corporation (A2100628).
Zitieren
APA
Wakamatsu, K., Doi, K., Kobatake, R., Oki, Y., & Tsuga, K. (2024). Evaluation of Bone Density for Primary Implant Stability Using a Newly Designed Drill: An In Vitro Study on Polyurethane Bone Blocks. Clinical and Experimental Dental Research, 10(6). https://doi.org/10.1002/cre2.70048
Vancouver
Wakamatsu K, Doi K, Kobatake R, Oki Y, Tsuga K. Evaluation of Bone Density for Primary Implant Stability Using a Newly Designed Drill: An In Vitro Study on Polyurethane Bone Blocks. Clinical and Experimental Dental Research. 2024;10(6). doi:10.1002/cre2.70048
BibTeX
@article{Wakamatsu2024,
author = {Wakamatsu, Kaien and Doi, Kazuya and Kobatake, Reiko and Oki, Yoshifumi and Tsuga, Kazuhiro},
title = {Evaluation of Bone Density for Primary Implant Stability Using a Newly Designed Drill: An In Vitro Study on Polyurethane Bone Blocks},
journal = {Clinical and Experimental Dental Research},
year = {2024},
volume = {10},
number = {6},
doi = {10.1002/cre2.70048}
}
EUVIMED