Finite Element Modelling of Demountable Truss Joints with Rectangular Hollow Sections and Self‐Drilling Screws
ce/papers · 2026-09 · 9 (2-3) · 785-790
DOI: 10.1002/cepa.70728 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Shekhar Silwal und 3 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Demountable joints in steel construction have significant roles in enhancing sustainability in the built environment, as it encourages the reusability. Demountable truss joints investigated in this paper consist of truss elements with Rectangular Hollow Sections (RHS) assembled using self‐drilling screws. Finite element analysis (FEA) models for T‐joints and K‐joint sub‐frames were firstly developed and validated against the experimental results. A reliable and efficient FEA modeling technique for screw and steel plate connections was developed by representing the threaded connection with the softened contact stiffness. The contact stiffness was fine‐tuned and verified by nine experimental tests of T‐joints. To further investigate the structural behavior of screwed truss joints and verify the developed simulation method, sub‐truss‐frames with K‐joints were modeled and analyzed. The FE results were compared with the experimental tests of K‐joint sub‐frames. Parametric analyses, including the varied number of screws, spacing distances and tubular section dimensions, were further conducted to determine the ultimate capacity, joint stiffness, and deformability of the demountable truss joints.
Zitieren
APA
Silwal, S., Santos, N., Al‐Maisari, A., & Ma, Z. (2026). Finite Element Modelling of Demountable Truss Joints with Rectangular Hollow Sections and Self‐Drilling Screws. ce/papers, 9(2-3), 785-790. https://doi.org/10.1002/cepa.70728
Vancouver
Silwal S, Santos N, Al‐Maisari A, Ma Z. Finite Element Modelling of Demountable Truss Joints with Rectangular Hollow Sections and Self‐Drilling Screws. ce/papers. 2026;9(2-3):785-790. doi:10.1002/cepa.70728
BibTeX
@article{Silwal2026,
author = {Silwal, Shekhar and Santos, Newton and Al‐Maisari, Abdullah and Ma, Zhongcheng},
title = {Finite Element Modelling of Demountable Truss Joints with Rectangular Hollow Sections and Self‐Drilling Screws},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {785--790},
doi = {10.1002/cepa.70728}
}
EUVIMED