EUVIMEDEUVIMED entdecken
Crossref

Finite Element Modelling and Tolerance Assessment of Speed‐Lock Beam‐to‐Upright Joints

David Santamaria, Jon Elguezabal, Aitor Oyanguren, Jon Larrañaga, Ibai Ulacia

ce/papers · 2026-09 · 9 (2-3) · 2294-2299

DOI: 10.1002/cepa.70492 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von David Santamaria und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a comprehensive investigation of speed‐lock beam‐to‐upright joints used in storage rack systems through detailed finite‐element (FE) modelling and experimental‐numerical geometric tolerance assessment. A novel and parametrised FE model based on the EN‐15512 simple‐cantilever test was developed incorporating explicit geometry of connector tabs, upright slots, beam‐to‐connector weld beads, and connector‐to‐upright contacts. Validation against nine tested assemblies showed that numerical initial stiffness ( k 0 ) fall within experimental dispersion. Building upon the validated model, the impact of manufacturing tolerances on connection performance was systematically examined. Experimental and numerical findings indicated that deviations in connector tab and upright slot dimensions can reduce joint stiffness by up to 16%.

Zitieren

APA

Santamaria, D., Elguezabal, J., Oyanguren, A., Larrañaga, J., & Ulacia, I. (2026). Finite Element Modelling and Tolerance Assessment of Speed‐Lock Beam‐to‐Upright Joints. ce/papers, 9(2-3), 2294-2299. https://doi.org/10.1002/cepa.70492

Vancouver

Santamaria D, Elguezabal J, Oyanguren A, Larrañaga J, Ulacia I. Finite Element Modelling and Tolerance Assessment of Speed‐Lock Beam‐to‐Upright Joints. ce/papers. 2026;9(2-3):2294-2299. doi:10.1002/cepa.70492

BibTeX
@article{Santamaria2026,
  author = {Santamaria, David and Elguezabal, Jon and Oyanguren, Aitor and Larrañaga, Jon and Ulacia, Ibai},
  title = {Finite Element Modelling and Tolerance Assessment of Speed‐Lock Beam‐to‐Upright Joints},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2294--2299},
  doi = {10.1002/cepa.70492}
}
Kostenlos starten →