Experimental Investigation of Demountable Truss Joints of Rectangular Hollow Sections using Self‐drilling Screws
ce/papers · 2026-09 · 9 (2-3) · 97-102
DOI: 10.1002/cepa.70333 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Abdullah Al‐Maisari und 4 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Rectangular Hollow Section (RHS) truss structure with the demountable non‐weld solutions is interesting for the reuse purpose, while it is challenging since the inner surface of RHS section is inaccessible. This paper presents a series of experimental investigations on the demountable RHS truss joints using self‐drilling screws. While self‐drilling screws have been extensively studied in the connections of cold‐formed thin sheets, the knowledge gap exists regarding their structural behaviour in primary load‐bearing systems. Twelve experimental tests on the demountable T‐joints were firstly performed to characterize the structural behaviour of screw groups with varied wall thicknesses and space distances between screws under both brace tension and compression. Secondly, fourteen sub‐trusses were manufactured and tested to investigate the structural behaviour of typical K‐joints with varied dimensions of RHS sections, screw spacings and inclined angles of braces. The experimental results revealed the critical dependence of load‐carrying capacities on the wall thicknesses of chord and braces. Due to the greater size of screw heads, the screw spacing has minor effect on the load‐carrying capacities of truss joints. The effect of gaps between the chord and brace plates was also investigated. The experimental tests laid a foundation for the further studies of full RHS trusses with demountable solutions, to promote the circular economy principle.
Zitieren
APA
Al‐Maisari, A., Santos, N. A. D., Georgiev, G., Antimonik, L., & Ma, Z. (2026). Experimental Investigation of Demountable Truss Joints of Rectangular Hollow Sections using Self‐drilling Screws. ce/papers, 9(2-3), 97-102. https://doi.org/10.1002/cepa.70333
Vancouver
Al‐Maisari A, Santos NAD, Georgiev G, Antimonik L, Ma Z. Experimental Investigation of Demountable Truss Joints of Rectangular Hollow Sections using Self‐drilling Screws. ce/papers. 2026;9(2-3):97-102. doi:10.1002/cepa.70333
BibTeX
@article{AlMaisari2026,
author = {Al‐Maisari, Abdullah and Santos, Newton Avila dos and Georgiev, Georgi and Antimonik, Lev and Ma, Zhongcheng},
title = {Experimental Investigation of Demountable Truss Joints of Rectangular Hollow Sections using Self‐drilling Screws},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {97--102},
doi = {10.1002/cepa.70333}
}
EUVIMED