EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Dimpled Screw Connections in Thin‐Walled Cold‐Formed Steel Sheets

Paulina Krolo, Lazar Lukačević, Ivan Palijan

ce/papers · 2026-09 · 9 (2-3) · 2240-2245

DOI: 10.1002/cepa.70693 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Paulina Krolo und 2 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cold‐formed steel (CFS) structures are increasingly adopted in modular construction due to their efficiency and adaptability. Screw connections in thin‐walled steel sheets often exhibit localized bearing deformation, reduced stiffness, and limited ductility, which can govern structural performance. An effective method to mitigate these limitations is the use of dimples, i.e., local indentations around screw holes that improve stress distribution, restrain out‐of‐plane deformation, and delay critical failure mechanisms. Current design standards, including Eurocode 3 and AISI S100, do not provide analytical models for such modified connections and therefore rely on experimental verification. This paper presents an experimental investigation of single‐shear screw connections in thin‐walled steel sheets reinforced with dimples. The study evaluates load‐bearing capacity, elastic stiffness, deformation response, and failure modes under shear loading, focusing on the combined influence of dimples and sheet thickness. The results show that dimples significantly enhance mechanical performance by increasing strength and stiffness, delaying bearing failure, and promoting stable, ductile behaviour, thereby supporting their future consideration in the design of cold‐formed steel connections.

Zitieren

APA

Krolo, P., Lukačević, L., & Palijan, I. (2026). Experimental Investigation of Dimpled Screw Connections in Thin‐Walled Cold‐Formed Steel Sheets. ce/papers, 9(2-3), 2240-2245. https://doi.org/10.1002/cepa.70693

Vancouver

Krolo P, Lukačević L, Palijan I. Experimental Investigation of Dimpled Screw Connections in Thin‐Walled Cold‐Formed Steel Sheets. ce/papers. 2026;9(2-3):2240-2245. doi:10.1002/cepa.70693

BibTeX
@article{Krolo2026,
  author = {Krolo, Paulina and Lukačević, Lazar and Palijan, Ivan},
  title = {Experimental Investigation of Dimpled Screw Connections in Thin‐Walled Cold‐Formed Steel Sheets},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2240--2245},
  doi = {10.1002/cepa.70693}
}
Kostenlos starten →