EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bearing Capacity of Bolts against Thin‐Walled Cold‐formed Steel Plate

Zhijian Zhang, Jurgen Becque, Pieter Desnerck

ce/papers · 2026-09 · 9 (2-3) · 1572-1577

DOI: 10.1002/cepa.70399 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Zhijian Zhang und 2 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Given the inapplicability of the EN 1993‐1‐8 standard to cold‐formed steel (CFS) products, a lack of design guidance exists for bolted connections in CFS structures. At the same time, specific test data on individual bolt behaviour only exist within a narrow range of CFS plate thicknesses and bolt sizes. Bolts for CFS applications are typically fully threaded along their length, reducing bearing stiffness, while a tendency for bolt tilting and sheet curling complicates experimental measurements. In this study, 15 lap shear tests were systematically conducted on CFS plates with thicknesses ranging from 2 mm to 6 mm, using M16, M20, and M24 bolts. The 2 mm and 3 mm thick plates were of grade S450, while all other plates were of grade S390. Additional coupon tests were conducted to determine the material properties for each plate thickness. A symmetric double‐connection, two‐bolts‐a‐side, single‐lap test configuration was adopted. Bolt shear was observed as a failure mode in the specimens with M16 bolts connecting 4 to 6 mm thick plates, whereas all other specimens failed by plate bearing. The EN 1993‐1‐8 and EN 1993‐1‐3 predictions of plate bearing capacity, connection stiffness and bolt shear force were evaluated. It was concluded that current rules overestimate the bearing capacity of bolted CFS connections, and more so as the bolt diameter increases and the plate thickness decreases.

Zitieren

APA

Zhang, Z., Becque, J., & Desnerck, P. (2026). Bearing Capacity of Bolts against Thin‐Walled Cold‐formed Steel Plate. ce/papers, 9(2-3), 1572-1577. https://doi.org/10.1002/cepa.70399

Vancouver

Zhang Z, Becque J, Desnerck P. Bearing Capacity of Bolts against Thin‐Walled Cold‐formed Steel Plate. ce/papers. 2026;9(2-3):1572-1577. doi:10.1002/cepa.70399

BibTeX
@article{Zhang2026,
  author = {Zhang, Zhijian and Becque, Jurgen and Desnerck, Pieter},
  title = {Bearing Capacity of Bolts against Thin‐Walled Cold‐formed Steel Plate},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {1572--1577},
  doi = {10.1002/cepa.70399}
}
Kostenlos starten →