EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Explicit FE Modelling of Cold‐formed Steel K‐Joints using Dimpled Screwed Connections

Ruilin Zhang, Cao Hung Pham, Hoang Vu Le, Paul Jones, Trevor Clayton, Mark Eckermann

ce/papers · 2026-09 · 9 (2-3) · 1646-1651

DOI: 10.1002/cepa.70416 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Ruilin Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cold‐formed steel (CFS) thin‐walled structures, such as floor joists, are becoming popular in mid‐rise buildings. These joists are typically fabricated as truss systems, with unlipped channels forming the top and bottom chords and lipped stiffened channels used as diagonal web members. All members are connected through both flanges using screwed connections with pre‐punched dimpled holes. An experimental program has been recently performed at the University of Sydney to isolate and investigate the behaviour and ultimate strength of a K‐joint cut from a floor joist. A novel test rig was specifically designed to test a K‐joint connecting two diagonal members (one in tension and one in compression) to the bottom chord in tension. The study considered variables such as joist members thicknesses. The findings from the K‐joint tests reflect the actual behaviour of joints within the flooring system, which cannot be adequately captured by conventional single‐lapped shear tests. This paper presents the use of the finite element software ABAQUS/Explicit to simulate and provide insights into K‐joint behaviour. Various aspects of the FE models, including fracture modelling of steel materials, loading rate and mesh sensitivity are addressed to optimise the computational efficiency and improve accuracy. The simulations are then validated against the experiments, showing good agreement between test and numerical results. It is demonstrated that FE analysis can be efficiently employed in future parametric studies to extend experimental data and optimise the design of K‐joints in CFS flooring systems.

Zitieren

APA

Zhang, R., Pham, C. H., Le, H. V., Jones, P., Clayton, T., & Eckermann, M. (2026). Explicit FE Modelling of Cold‐formed Steel K‐Joints using Dimpled Screwed Connections. ce/papers, 9(2-3), 1646-1651. https://doi.org/10.1002/cepa.70416

Vancouver

Zhang R, Pham CH, Le HV, Jones P, Clayton T, Eckermann M. Explicit FE Modelling of Cold‐formed Steel K‐Joints using Dimpled Screwed Connections. ce/papers. 2026;9(2-3):1646-1651. doi:10.1002/cepa.70416

BibTeX
@article{Zhang2026,
  author = {Zhang, Ruilin and Pham, Cao Hung and Le, Hoang Vu and Jones, Paul and Clayton, Trevor and Eckermann, Mark},
  title = {Explicit FE Modelling of Cold‐formed Steel K‐Joints using Dimpled Screwed Connections},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {1646--1651},
  doi = {10.1002/cepa.70416}
}
Kostenlos starten →