Electropolishing and Nanometallic Multilayer Redefine Fatigue Resistance of C+N Stainless Steel Manufactured via Laser Powder Bed Fusion (PBF‐LB/M)
ce/papers · 2026-09 · 9 (2-3) · 424-429
DOI: 10.1002/cepa.70666 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Mohsen Falah und 5 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Additively manufactured materials are increasingly utilized for producing customized components across various industries, including civil engineering and aerospace. These surfaces often necessitate a smooth finish, which can be attained through post‐processing techniques alongside carefully controlled process parameters. In this study, the effects of electropolishing of PBF‐LB/M PrintDur® HSA is investigated. Surface morphologies are analyzed using laser scanning microscopy, indicating a reduction in the initial surface roughness by more than 80%, with S a values reaching below 2.0 μm. By accounting for the total electrical charge passed during electropolishing, the experimental results were systematically correlated with current‐controlled electropolishing parameters. Preliminary fatigue tests on electropolished specimens indicate fatigue resistance comparable to that of machined samples. Cu/Ni nanometallic multilayer (NMM) treated samples exhibit higher fatigue resistance compared to untreated samples. Electropolishing, which serves as an alternative to conventional CNC milling, creates surface textures that enable the efficient electrodeposition of NMM coatings. In conclusion, electropolishing can produce surface finishes of adequate quality to facilitate the effective application of subsequent NMM coatings, potentially leading to further improvements in fatigue resistance.
Zitieren
APA
Falah, M., Barmeyer, S., Blankenhagen, J., Radlbeck, C., Mensinger, M., & Rutner, M. (2026). Electropolishing and Nanometallic Multilayer Redefine Fatigue Resistance of C+N Stainless Steel Manufactured via Laser Powder Bed Fusion (PBF‐LB/M). ce/papers, 9(2-3), 424-429. https://doi.org/10.1002/cepa.70666
Vancouver
Falah M, Barmeyer S, Blankenhagen J, Radlbeck C, Mensinger M, Rutner M. Electropolishing and Nanometallic Multilayer Redefine Fatigue Resistance of C+N Stainless Steel Manufactured via Laser Powder Bed Fusion (PBF‐LB/M). ce/papers. 2026;9(2-3):424-429. doi:10.1002/cepa.70666
BibTeX
@article{Falah2026,
author = {Falah, Mohsen and Barmeyer, Simon and Blankenhagen, Jakob and Radlbeck, Christina and Mensinger, Martin and Rutner, Marcus},
title = {Electropolishing and Nanometallic Multilayer Redefine Fatigue Resistance of C+N Stainless Steel Manufactured via Laser Powder Bed Fusion (PBF‐LB/M)},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {424--429},
doi = {10.1002/cepa.70666}
}
EUVIMED