Additively Manufactured Scalmalloy via Laser Powder Bed Fusion (L‐PBF): Temperature‐Dependent Tensile and Fatigue Behaviors
Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1496-1513
DOI: 10.1111/ffe.14549 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 09.01.2025. Verfasst von Md Faysal Khan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Aeronautics and Space Administration, National Science Foundation.
Abstract (Originalsprache)
This study characterized the micro‐/defect‐structure of laser powder bed fused (L‐PBF) Scalmalloy and investigated its mechanical behavior across a wide temperature range. Hot isostatic pressing effectively reduced defect content while maintaining similar microstructure and room temperature tensile properties to stress relief condition; thus, it was applied to all specimens. Tensile and strain‐controlled fatigue (fully reversed at 0.005, 0.003, 0.002, and 0.001 mm/mm amplitudes) tests were conducted from cryogenic (−195°C) to elevated temperatures (up to 400°C for tensile and 200°C for fatigue). Tensile strength decreased gradually until 100°C and then sharply at 200°C due to excessive grain boundary sliding. Fatigue resistance was consistent across temperatures at the highest strain amplitude (0.005 mm/mm) but reduced significantly at 200°C and intermediate amplitudes of 0.003 and 0.002 mm/mm. At the lowest amplitude (0.001 mm/mm), fatigue life depended more on crack‐initiating defect size than temperature.
Förderung
- National Aeronautics and Space Administration
- National Science Foundation
Zitieren
APA
Khan, M. F., Ghiaasiaan, R., Gradl, P. R., Shao, S., & Shamsaei, N. (2025). Additively Manufactured Scalmalloy via Laser Powder Bed Fusion (L‐PBF): Temperature‐Dependent Tensile and Fatigue Behaviors. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1496-1513. https://doi.org/10.1111/ffe.14549
Vancouver
Khan MF, Ghiaasiaan R, Gradl PR, Shao S, Shamsaei N. Additively Manufactured Scalmalloy via Laser Powder Bed Fusion (L‐PBF): Temperature‐Dependent Tensile and Fatigue Behaviors. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1496-1513. doi:10.1111/ffe.14549
BibTeX
@article{Khan2025,
author = {Khan, Md Faysal and Ghiaasiaan, Reza and Gradl, Paul R. and Shao, Shuai and Shamsaei, Nima},
title = {Additively Manufactured Scalmalloy via Laser Powder Bed Fusion (L‐PBF): Temperature‐Dependent Tensile and Fatigue Behaviors},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2025},
volume = {48},
number = {4},
pages = {1496--1513},
doi = {10.1111/ffe.14549}
}
EUVIMED