Advancements in Additive Manufacturing of Tantalum via the Laser Powder Bed Fusion (PBF-LB/M): A Comprehensive Review
Materials · 27.09.2023 · 16 (19) · 6419
DOI: 10.3390/ma16196419 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 27.09.2023. Verfasst von Aziz Ul Hassan Mohsan und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Mechatronic Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: International Research Scholarship and President’s Scholarship, the University of Technology Sydney (UTS).
Abstract (Originalsprache)
Additive manufacturing (AM) exhibits a prime increment in manufacturing technology development. The last few decades have witnessed massive improvement in this field of research, including the growth in the process, equipment, and materials. Irrespective of compelling technological advancements, technical challenges provoke the application and development of these technologies. Metal additive manufacturing is considered a prime sector of the industrial revolution. Various metal AM techniques, including Selective Laser Sintering (SLS), Laser Powder Bed Fusion (PBF-LB/M), and Electron Beam Powder Bed Fusion (PBF-EB/M), have been developed according to materials and process classifications. PBF-LB/M is considered one of the most suitable choices for metallic materials. PBF-LB/M of tantalum has become a hot topic of research in the current century owing to the high biocompatibility of tantalum and its high-end safety applications. PBF-LB/M of porous Ta can direct unexplored research prospects in biomedical and orthopedics by adapting mechanical and biomedical properties and pioneering implant designs with predictable features. This review primarily examines the current advancements in the additive manufacturing of tantalum and related alloys using the PBF-LB/M process. The analysis encompasses the evaluation of process parameters, mechanical properties, and potential biological applications. This will offer the reader valuable insights into the present state of PBF-LB/M for tantalum alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Mechatronic Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia.
ORCID-Profile: Dongbin Wei
Förderung
- International Research Scholarship and President’s Scholarship
- the University of Technology Sydney (UTS)
Zitieren
APA
Mohsan, A. U. H., & Wei, D. (2023). Advancements in Additive Manufacturing of Tantalum via the Laser Powder Bed Fusion (PBF-LB/M): A Comprehensive Review. Materials, 16(19), 6419. https://doi.org/10.3390/ma16196419
Vancouver
Mohsan AUH, Wei D. Advancements in Additive Manufacturing of Tantalum via the Laser Powder Bed Fusion (PBF-LB/M): A Comprehensive Review. Materials. 2023;16(19):6419. doi:10.3390/ma16196419
BibTeX
@article{Mohsan2023,
author = {Mohsan, Aziz Ul Hassan and Wei, Dongbin},
title = {Advancements in Additive Manufacturing of Tantalum via the Laser Powder Bed Fusion (PBF-LB/M): A Comprehensive Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {19},
pages = {6419},
doi = {10.3390/ma16196419}
}
EUVIMED