EUVIMEDDescoperă EUVIMED
Open access · CC BY-NC-ND 4.0

Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing

Ayumu Sakaki iD, Tetsushi Namatame, Makoto Nakaya, Takeshi Omasa iD

Biotechnology and Bioengineering · 2024-02 · 121 (2) · 605-617

DOI: 10.1002/bit.28593 ↗

At a glance

Journal article in Biotechnology and Bioengineering, published online on 2023-11-13. Written by Ayumu Sakaki and 3 co-authors. Institution: Innovation Center, Marketing Headquarters, Yokogawa Electric Corporation, Tokyo, Japan. Major MEDLINE topics: Biological Products. Cited 10 times so far (Crossref); 30 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

RezumatSubjectsDate bibliograficeCiteRelated studies

Abstract (original language)

To enhance the robustness and flexibility of biopharmaceutical manufacturing, a paradigm shift toward methods of continuous processing, such as perfusion, and fundamental technologies for high‐throughput process development are being actively investigated. The continuous upstream process must establish an advanced control strategy to ensure a “State of Control” before operation. Specifically, feedforward and feedback control must address the complex fluctuations that occur during the culture process and maintain critical process parameters in appropriate states. However, control system design for industry‐standard mammalian cell culture processes is still often performed in a laborious trial‐and‐error manner. This paper provides a novel control approach in which controller specifications to obtain desired control characteristics can be determined systematically by combining a culture model with control theory. In the proposed scheme, control conditions, such as PID parameters, can be specified mechanistically based on process understanding and control requirements without qualitative decision making or specific preliminary experiments. The effectiveness of the model‐based control algorithm was verified by control simulations assuming perfusion Chinese hamster ovary culture. As a tool to assist in the development of control strategies, this study will reduce the high operational workload that is a serious problem in continuous culture and facilitate the digitalization of bioprocesses.

Subjects

MeSH terms (MEDLINE)

Biological ProductsCricetinaeAnimalsCHO CellsCricetulusCell Culture TechniquesTechnology

Author keywords

State of Controlbiopharmaceutical manufacturingmammalian cellmodel-based control system designpartial model matchingperfusion culture

Substances

Biological Products

Authors and institutions

  • Innovation Center, Marketing Headquarters, Yokogawa Electric Corporation, Tokyo, Japan.
  • Graduate School of Engineering, Osaka University, Osaka, Japan.

ORCID profiles: Ayumu Sakaki, Takeshi Omasa

Cite

APA

Sakaki, A., Namatame, T., Nakaya, M., & Omasa, T. (2024). Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing. Biotechnology and Bioengineering, 121(2), 605-617. https://doi.org/10.1002/bit.28593

Vancouver

Sakaki A, Namatame T, Nakaya M, Omasa T. Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing. Biotechnology and Bioengineering. 2024;121(2):605-617. doi:10.1002/bit.28593

BibTeX
@article{Sakaki2024,
  author = {Sakaki, Ayumu and Namatame, Tetsushi and Nakaya, Makoto and Omasa, Takeshi},
  title = {Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing},
  journal = {Biotechnology and Bioengineering},
  year = {2024},
  volume = {121},
  number = {2},
  pages = {605--617},
  doi = {10.1002/bit.28593}
}
Start for free →