EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing

Ayumu Sakaki iD, Tetsushi Namatame, Makoto Nakaya, Takeshi Omasa iD

Biotechnology and Bioengineering · 2024-02 · 121 (2) · 605-617

DOI: 10.1002/bit.28593 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biotechnology and Bioengineering, online erschienen am 13.11.2023. Verfasst von Ayumu Sakaki und 3 weiteren Autor:innen. Beteiligte Einrichtung: Innovation Center, Marketing Headquarters, Yokogawa Electric Corporation, Tokyo, Japan. Hauptthemen laut MEDLINE: Biological Products. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the robustness and flexibility of biopharmaceutical manufacturing, a paradigm shift toward methods of continuous processing, such as perfusion, and fundamental technologies for high‐throughput process development are being actively investigated. The continuous upstream process must establish an advanced control strategy to ensure a “State of Control” before operation. Specifically, feedforward and feedback control must address the complex fluctuations that occur during the culture process and maintain critical process parameters in appropriate states. However, control system design for industry‐standard mammalian cell culture processes is still often performed in a laborious trial‐and‐error manner. This paper provides a novel control approach in which controller specifications to obtain desired control characteristics can be determined systematically by combining a culture model with control theory. In the proposed scheme, control conditions, such as PID parameters, can be specified mechanistically based on process understanding and control requirements without qualitative decision making or specific preliminary experiments. The effectiveness of the model‐based control algorithm was verified by control simulations assuming perfusion Chinese hamster ovary culture. As a tool to assist in the development of control strategies, this study will reduce the high operational workload that is a serious problem in continuous culture and facilitate the digitalization of bioprocesses.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biological ProductsCricetinaeAnimalsCHO CellsCricetulusCell Culture TechniquesTechnology

Stichwörter der Autor:innen

State of Controlbiopharmaceutical manufacturingmammalian cellmodel-based control system designpartial model matchingperfusion culture

Substanzen

Biological Products

Autor:innen und Institutionen

  • Innovation Center, Marketing Headquarters, Yokogawa Electric Corporation, Tokyo, Japan.
  • Graduate School of Engineering, Osaka University, Osaka, Japan.

ORCID-Profile: Ayumu Sakaki, Takeshi Omasa

Zitieren

APA

Sakaki, A., Namatame, T., Nakaya, M., & Omasa, T. (2024). Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing. Biotechnology and Bioengineering, 121(2), 605-617. https://doi.org/10.1002/bit.28593

Vancouver

Sakaki A, Namatame T, Nakaya M, Omasa T. Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing. Biotechnology and Bioengineering. 2024;121(2):605-617. doi:10.1002/bit.28593

BibTeX
@article{Sakaki2024,
  author = {Sakaki, Ayumu and Namatame, Tetsushi and Nakaya, Makoto and Omasa, Takeshi},
  title = {Model‐based control system design to manage process parameters in mammalian cell culture for biopharmaceutical manufacturing},
  journal = {Biotechnology and Bioengineering},
  year = {2024},
  volume = {121},
  number = {2},
  pages = {605--617},
  doi = {10.1002/bit.28593}
}
Kostenlos starten →