EUVIMEDOpdag EUVIMED
Open access

A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination

Kraiwit Promsen, Panphailin Chaiyahan, Tanin Tangkuaram, Jiraporn Kitikul, Manoch Thanomwat, Prakasit Intaphong, Ratchadaporn Puntharod, Supaporn Sangsrichan, Surasak Kuimalee, Jirapatpong Senabut, Sakchai Satienperakul iD

Luminescence · 2026-07 · 41 (7)

DOI: 10.1002/bio.70575 ↗

At a glance

Journal article in Luminescence, published online on 2026-07-16. Written by Kraiwit Promsen and 10 co-authors. Institution: Department of Chemistry, Faculty of Science, Maejo University, Chiang Mai, Thailand. Major MEDLINE topics: Electrochemical Techniques, Gallic Acid, Luminescent Measurements, Printing, Three-Dimensional. 41 references. The full text is freely available in PubMed Central. Funded by: National Research Council of Thailand.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This work presents a sustainable, fully 3D‐printed electrochemiluminescence (ECL) microcell with an integrated three‐electrode system for the sensitive determination of gallic acid. The device comprises a biodegradable polylactic acid (PLA) microcell integrated with a three‐electrode system fabricated from carbon black‐loaded PLA, enabling compact and low‐cost electrochemical measurements. A luminol‐based ECL system in carbonate buffer was employed, with carbon dots (CDs) introduced to enhance emission intensity by promoting electron transfer and reactive oxygen species generation, thereby amplifying the chemiexcitation pathway. The working electrode was modified with Prussian blue to improve electrochemical performance, while a pseudo‐Ag/AgCl reference electrode ensured stable potential control. Under optimized conditions, the platform exhibited a linear response over 5–1000 μg L −1 with a limit of detection of 0.26 μg L −1 and good repeatability. Furthermore, smartphone‐based RGB analysis provided a portable alternative for signal readout, achieving a detection limit of 3.70 μg L −1 . The method was successfully applied to commercial cosmetic samples, showing good agreement with high‐performance liquid chromatography. These results highlight the potential of the biodegradable 3D‐printed ECL microcell as a simple, sustainable, and accessible platform for portable analytical applications.

Subjects

MeSH terms (MEDLINE)

Electrochemical TechniquesGallic AcidLuminescent MeasurementsPrinting, Three-DimensionalElectrodesLuminolLuminescencePolyesters

Author keywords

3D‐printed deviceantioxidantcosmetic analysiselectrochemiluminescencegallic acidluminol

Substances

Gallic Acidpoly(lactide)LuminolPolyesters

Authors and institutions

  • Department of Chemistry, Faculty of Science, Maejo University, Chiang Mai, Thailand.
  • Department of Industrial Chemistry Innovation, Faculty of Science, Maejo University, Chiang Mai, Thailand.
  • Faculty of Science and Agricultural Technology, Rajamangala University of Technology Lanna, Chiang Rai, Thailand.

ORCID profiles: Sakchai Satienperakul

Funding

  • National Research Council of Thailand

Cite

APA

Promsen, K., Chaiyahan, P., Tangkuaram, T., Kitikul, J., Thanomwat, M., Intaphong, P., Puntharod, R., Sangsrichan, S., Kuimalee, S., Senabut, J., & Satienperakul, S. (2026). A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination. Luminescence, 41(7). https://doi.org/10.1002/bio.70575

Vancouver

Promsen K, Chaiyahan P, Tangkuaram T, Kitikul J, Thanomwat M, Intaphong P, et al. A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination. Luminescence. 2026;41(7). doi:10.1002/bio.70575

BibTeX
@article{Promsen2026,
  author = {Promsen, Kraiwit and Chaiyahan, Panphailin and Tangkuaram, Tanin and Kitikul, Jiraporn and Thanomwat, Manoch and Intaphong, Prakasit and Puntharod, Ratchadaporn and Sangsrichan, Supaporn and Kuimalee, Surasak and Senabut, Jirapatpong and Satienperakul, Sakchai},
  title = {A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination},
  journal = {Luminescence},
  year = {2026},
  volume = {41},
  number = {7},
  doi = {10.1002/bio.70575}
}
Start for free →