A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination
Luminescence · 2026-07 · 41 (7)
DOI: 10.1002/bio.70575 ↗Kurz gefasst
Fachartikel in der Zeitschrift Luminescence, online erschienen am 16.07.2026. Verfasst von Kraiwit Promsen und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Faculty of Science, Maejo University, Chiang Mai, Thailand. Hauptthemen laut MEDLINE: Electrochemical Techniques, Gallic Acid, Luminescent Measurements, Printing, Three-Dimensional. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Research Council of Thailand.
Abstract (Originalsprache)
This work presents a sustainable, fully 3D‐printed electrochemiluminescence (ECL) microcell with an integrated three‐electrode system for the sensitive determination of gallic acid. The device comprises a biodegradable polylactic acid (PLA) microcell integrated with a three‐electrode system fabricated from carbon black‐loaded PLA, enabling compact and low‐cost electrochemical measurements. A luminol‐based ECL system in carbonate buffer was employed, with carbon dots (CDs) introduced to enhance emission intensity by promoting electron transfer and reactive oxygen species generation, thereby amplifying the chemiexcitation pathway. The working electrode was modified with Prussian blue to improve electrochemical performance, while a pseudo‐Ag/AgCl reference electrode ensured stable potential control. Under optimized conditions, the platform exhibited a linear response over 5–1000 μg L −1 with a limit of detection of 0.26 μg L −1 and good repeatability. Furthermore, smartphone‐based RGB analysis provided a portable alternative for signal readout, achieving a detection limit of 3.70 μg L −1 . The method was successfully applied to commercial cosmetic samples, showing good agreement with high‐performance liquid chromatography. These results highlight the potential of the biodegradable 3D‐printed ECL microcell as a simple, sustainable, and accessible platform for portable analytical applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemistry, Faculty of Science, Maejo University, Chiang Mai, Thailand.
- Department of Industrial Chemistry Innovation, Faculty of Science, Maejo University, Chiang Mai, Thailand.
- Faculty of Science and Agricultural Technology, Rajamangala University of Technology Lanna, Chiang Rai, Thailand.
ORCID-Profile: Sakchai Satienperakul
Förderung
- National Research Council of Thailand
Zitieren
APA
Promsen, K., Chaiyahan, P., Tangkuaram, T., Kitikul, J., Thanomwat, M., Intaphong, P., Puntharod, R., Sangsrichan, S., Kuimalee, S., Senabut, J., & Satienperakul, S. (2026). A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination. Luminescence, 41(7). https://doi.org/10.1002/bio.70575
Vancouver
Promsen K, Chaiyahan P, Tangkuaram T, Kitikul J, Thanomwat M, Intaphong P, et al. A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination. Luminescence. 2026;41(7). doi:10.1002/bio.70575
BibTeX
@article{Promsen2026,
author = {Promsen, Kraiwit and Chaiyahan, Panphailin and Tangkuaram, Tanin and Kitikul, Jiraporn and Thanomwat, Manoch and Intaphong, Prakasit and Puntharod, Ratchadaporn and Sangsrichan, Supaporn and Kuimalee, Surasak and Senabut, Jirapatpong and Satienperakul, Sakchai},
title = {A Sustainable 3D‐Printed Electrochemiluminescence Microcell With an Integrated Three‐Electrode System for Gallic Acid Determination},
journal = {Luminescence},
year = {2026},
volume = {41},
number = {7},
doi = {10.1002/bio.70575}
}
EUVIMED