The Effect of Argon Plasma Treatment on the Interface Properties of Aramid Fiber III /Epoxy Composites
Journal of Applied Polymer Science · 2026-11-07
DOI: 10.1002/app.71749 ↗At a glance
Journal article in Journal of Applied Polymer Science, published online on 2026-11-07. Written by Wen Geng and 4 co-authors. 35 references. Funded by: Natural Science Foundation of Liaoning Province, National Natural Science Foundation of China.
Abstract (original language)
To improve the interfacial adhesion between Aramid III (AF III) fibers and epoxy composites, argon plasma was employed to modify the fiber surface. The effects of treatment power (100–400 W) on surface chemistry, morphology, wettability, single‐fiber tensile strength, and interfacial shear strength (IFSS) were investigated. Plasma treatment increased reactive functional groups and formed micro‐scale etching structures, enhancing surface chemical activity and mechanical interlocking. At 200 W, the (O + N)/C atomic ratio reached a maximum of 37.21%, and surface energy increased to 68.52 mJ/m 2 , 48.50% higher than that of the untreated fiber. The roughness parameters Ra and Rq peaked at 164 and 193 nm, respectively. Consequently, the IFSS reached 38.88 MPa, an increase of 36.37%, and the interfacial failure mode transitioned from adhesive to cohesive failure. Excessive power (≥ 300 W) led to polar group decomposition, over‐etching, and surface smoothing, deteriorating interfacial performance. This study reveals the nonlinear regulation mechanism of argon plasma treatment on the interfacial properties of AF III/epoxy composites, providing theoretical and experimental insights for interface optimization in high‐performance aramid composites.
Funding
- Natural Science Foundation of Liaoning Province
- National Natural Science Foundation of China
Cite
APA
Geng, W., Wang, J., He, W., Ren, R., & Xiong, X. (2026). The Effect of Argon Plasma Treatment on the Interface Properties of Aramid Fiber III /Epoxy Composites. Journal of Applied Polymer Science. https://doi.org/10.1002/app.71749
Vancouver
Geng W, Wang J, He W, Ren R, Xiong X. The Effect of Argon Plasma Treatment on the Interface Properties of Aramid Fiber III /Epoxy Composites. Journal of Applied Polymer Science. 2026. doi:10.1002/app.71749
BibTeX
@article{Geng2026,
author = {Geng, Wen and Wang, Jing and He, Wenzheng and Ren, Rong and Xiong, Xuhai},
title = {The Effect of Argon Plasma Treatment on the Interface Properties of Aramid Fiber III /Epoxy Composites},
journal = {Journal of Applied Polymer Science},
year = {2026},
doi = {10.1002/app.71749}
}
EUVIMED