EUVIMEDOpdag EUVIMED
Crossref

Fabrication and Application of Interface‐Enhanced PPDO ‐Based Composite Membrane With Enhanced Interfacial Stability via Hot Pressing

Jinxue Cheng, Xin Tian, Jiulin Bai, Yingzi Shi, Cunshan Liu, Zhi Fan, Minjie Guo

Journal of Applied Polymer Science · 2026-09-15 · 143 (35)

DOI: 10.1002/app.71041 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2026-06-16. Written by Jinxue Cheng and 6 co-authors. 46 references. Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Electrospun heterogeneous multilayer membranes have attracted increasing attention for biomedical tissue repair owing to their degradation behavior and favorable biocompatibility. However, delamination caused by weak interfacial bonding often compromises their mechanical stability and structural integrity. To address this challenge, a hot‐pressing technique was employed to reinforce the interfacial adhesion of electrospun poly( p ‐dioxanone) (PPDO)‐based composite membranes. Controlled hot‐pressing conditions induced intimate fusion between adjacent layers, thereby enhancing interlayer bonding and overall mechanical strength. An asymmetric trilayer configuration was subsequently constructed, consisting of an upper hydrophilic and highly aligned PPDO nanofiber layer, a middle PPDO flat film serving as a transitional bonding layer, and a lower hydrophobic PPDO/poly(lactic acid) (PLA) composite nanofiber layer fabricated via dual‐needle electrospinning. This hierarchical architecture offers functional differentiation while maintaining structural integrity. The lower hydrophobic PPDO/PLA layer acts as a barrier against fluid penetration, the middle PPDO film serves as a transitional bonding layer that ensures interfacial continuity, while the upper hydrophilic PPDO layer facilitates cell adhesion and tissue regeneration. This interfacial reinforcement strategy enables the fabrication of biodegradable and functionally graded composite membranes that achieve a balance between structural integrity and degradability, offering a promising platform for postoperative anti‐adhesion and tissue regeneration applications.

Funding

  • National Natural Science Foundation of China

Cite

APA

Cheng, J., Tian, X., Bai, J., Shi, Y., Liu, C., Fan, Z., & Guo, M. (2026). Fabrication and Application of Interface‐Enhanced PPDO ‐Based Composite Membrane With Enhanced Interfacial Stability via Hot Pressing. Journal of Applied Polymer Science, 143(35). https://doi.org/10.1002/app.71041

Vancouver

Cheng J, Tian X, Bai J, Shi Y, Liu C, Fan Z, et al. Fabrication and Application of Interface‐Enhanced PPDO ‐Based Composite Membrane With Enhanced Interfacial Stability via Hot Pressing. Journal of Applied Polymer Science. 2026;143(35). doi:10.1002/app.71041

BibTeX
@article{Cheng2026,
  author = {Cheng, Jinxue and Tian, Xin and Bai, Jiulin and Shi, Yingzi and Liu, Cunshan and Fan, Zhi and Guo, Minjie},
  title = {Fabrication and Application of Interface‐Enhanced PPDO ‐Based Composite Membrane With Enhanced Interfacial Stability via Hot Pressing},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {35},
  doi = {10.1002/app.71041}
}
Start for free →