Progress on the Fabrication of Superconducting Wires and Tapes via Hot Isostatic Pressing
Materials · 22.02.2023 · 16 (5) · 1786
DOI: 10.3390/ma16051786 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 22.02.2023. Verfasst von Zhenyu Lei und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Applied Superconductivity, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Key Research Program of Frontier Sciences of Chinese Academy of Sciences.
Abstract (Originalsprache)
Fabrication of high-performance superconducting wires and tapes is essential for large-scale applications of superconducting materials. The powder-in-tube (PIT) method involves a series of cold processes and heat treatments and has been widely used for fabricating BSCCO, MgB2, and iron-based superconducting wires. The densification of the superconducting core is limited by traditional heat treatment under atmospheric pressure. The low density of the superconducting core and a large number of pores and cracks are the main factors limiting the current-carrying performance of PIT wires. Therefore, to improve the transport critical current density of the wires, it is essential to densify the superconducting core and eliminate pores and cracks to enhance grain connectivity. Hot isostatic pressing (HIP) sintering was employed to improve the mass density of superconducting wires and tapes. In this paper, we review the development and application of the HIP process in the manufacturing of BSCCO, MgB2, and iron-based superconducting wires and tapes. The development of HIP parameters and the performance of different wires and tapes are reviewed. Finally, we discuss the advantages and prospects of the HIP process for the fabrication of superconducting wires and tapes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Applied Superconductivity, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China.
- University of Chinese Academy of Sciences, Beijing 100049, China.
- Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan 250013, China.
ORCID-Profile: Dongliang Wang
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Key Research Program of Frontier Sciences of Chinese Academy of Sciences
- International Partnership Program of Chinese Academy of Sciences
- National Key R&D Program of China
- Key Research Program of Frontier Sciences of the Chinese Academy of Sciences
- International Partnership Program of the Chinese Academy of Sciences
Zitieren
APA
Lei, Z., Yao, C., Guo, W., Wang, D., & Ma, Y. (2023). Progress on the Fabrication of Superconducting Wires and Tapes via Hot Isostatic Pressing. Materials, 16(5), 1786. https://doi.org/10.3390/ma16051786
Vancouver
Lei Z, Yao C, Guo W, Wang D, Ma Y. Progress on the Fabrication of Superconducting Wires and Tapes via Hot Isostatic Pressing. Materials. 2023;16(5):1786. doi:10.3390/ma16051786
BibTeX
@article{Lei2023,
author = {Lei, Zhenyu and Yao, Chao and Guo, Wenwen and Wang, Dongliang and Ma, Yanwei},
title = {Progress on the Fabrication of Superconducting Wires and Tapes via Hot Isostatic Pressing},
journal = {Materials},
year = {2023},
volume = {16},
number = {5},
pages = {1786},
doi = {10.3390/ma16051786}
}
EUVIMED