EUVIMEDOpdag EUVIMED
Crossref

Compression‐Induced Mechanical Pore Opening in Microcellular Polyurethane Elastomers: Decoupling Open Porosity Effects From Matrix Contributions

Maomin Zhen, Xudong Zhang, Yali Guo, Xiaodong Li, Xufeng Zhang, Jianping Zhang, Yibing Xia, Hao Jiang, Meishuai Zou

Journal of Applied Polymer Science · 2026-06-15 · 143 (23)

DOI: 10.1002/app.70771 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2026-04-14. Written by Maomin Zhen and 8 co-authors. 52 references. Funded by: National Science and Technology Program during the Twelfth Five-year Plan Period.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study presents a stress‐induced pore rupture strategy for decoupling cellular architecture from matrix properties in microcellular polyurethane elastomers. Controlled mechanical compression was applied to a single formulation to tune open porosity (14%–67%) while preserving matrix chemistry and nanoscale morphology, as verified by FTIR, XRD, and SAXS analysis. In situ CT imaging revealed distinct deformation mechanisms: closed‐cell structures deformed through gradual pore compression dominated by gas‐spring effects, whereas open‐cell networks exhibited immediate strut reorientation and extensive compaction governed by solid matrix deformation. Quantitative analysis showed that cellular deformation accounted for 81.2%–86.8% of total strain in open‐cell foams, compared with 69.2%–74.1% in closed‐cell systems. Increasing open porosity reduced stiffness by 27% but enhanced energy dissipation by 63%. Digital image correlation further demonstrated localized strain in closed‐cell foams and uniform stress redistribution in open‐cell architectures. Vibration testing revealed complementary performance, with high‐porosity foams suppressing resonance through viscous damping and low‐porosity foams providing superior high‐frequency isolation. This work establishes microstructure‐guided design principles for programming dynamic mechanical properties in polymer foams, offering a pathway toward lightweight material for vibration control and impact protection.

Funding

  • National Science and Technology Program during the Twelfth Five-year Plan Period

Cite

APA

Zhen, M., Zhang, X., Guo, Y., Li, X., Zhang, X., Zhang, J., Xia, Y., Jiang, H., & Zou, M. (2026). Compression‐Induced Mechanical Pore Opening in Microcellular Polyurethane Elastomers: Decoupling Open Porosity Effects From Matrix Contributions. Journal of Applied Polymer Science, 143(23). https://doi.org/10.1002/app.70771

Vancouver

Zhen M, Zhang X, Guo Y, Li X, Zhang X, Zhang J, et al. Compression‐Induced Mechanical Pore Opening in Microcellular Polyurethane Elastomers: Decoupling Open Porosity Effects From Matrix Contributions. Journal of Applied Polymer Science. 2026;143(23). doi:10.1002/app.70771

BibTeX
@article{Zhen2026,
  author = {Zhen, Maomin and Zhang, Xudong and Guo, Yali and Li, Xiaodong and Zhang, Xufeng and Zhang, Jianping and Xia, Yibing and Jiang, Hao and Zou, Meishuai},
  title = {Compression‐Induced Mechanical Pore Opening in Microcellular Polyurethane Elastomers: Decoupling Open Porosity Effects From Matrix Contributions},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {23},
  doi = {10.1002/app.70771}
}
Start for free →