EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Mechanical Properties and Energy Absorbing Capability of Polyurethane Microcellular Elastomers under Different Compressive Strain Rates

Zhiying Zhao, Xiaodong Li, Hao Jiang, Xing Su, Xudong Zhang, Meishuai Zou iD

Polymers · 03.02.2023 · 15 (3) · 778

DOI: 10.3390/polym15030778 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.02.2023. Verfasst von Zhiying Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyurethane microcellular elastomers (PUME) are good at impact protection and energy absorption, and belong to rate sensitive- and strain history-dependent materials. In this study, PUME with different densities of 800 kg/m3, 600 kg/m3 and 400 kg/m3 were prepared, then the compressive responses of PUME in the strain rate range of 0.001 s−1 to 3400 s−1 were systemically investigated. By studying the energy absorption and efficiency diagram of PUME, the compressive properties of materials with different densities under compressive impact load were described, which showed that PUME with a density of 600 kg/m3 had better performance. A visco–hyperelasticity–air constitutive model was established to describe the large deformation response of PUME at high strain rates. The model included three components: hyperelastic part, viscoelastic part and gas pressure part. Quasi-static and dynamic compression tests were used to determine the constitutive relations of seven parameters. The samples with a density of 600 kg/m3 at different strain rates were fitted by MATLAB software, and the constitutive model parameters were obtained. The comparison between the constitutive equation and the experimental results showed that there was a good consistency. The constitutive model can provide data support for simulation analysis and application of PUME as energy absorbing protective facilities.

Schlagwörter

Stichwörter der Autor:innen

PUMEconstitutive modelenergy absorption and efficiency diagramsstrain rate

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.

ORCID-Profile: Meishuai Zou

Zitieren

APA

Zhao, Z., Li, X., Jiang, H., Su, X., Zhang, X., & Zou, M. (2023). Study on the Mechanical Properties and Energy Absorbing Capability of Polyurethane Microcellular Elastomers under Different Compressive Strain Rates. Polymers, 15(3), 778. https://doi.org/10.3390/polym15030778

Vancouver

Zhao Z, Li X, Jiang H, Su X, Zhang X, Zou M. Study on the Mechanical Properties and Energy Absorbing Capability of Polyurethane Microcellular Elastomers under Different Compressive Strain Rates. Polymers. 2023;15(3):778. doi:10.3390/polym15030778

BibTeX
@article{Zhao2023,
  author = {Zhao, Zhiying and Li, Xiaodong and Jiang, Hao and Su, Xing and Zhang, Xudong and Zou, Meishuai},
  title = {Study on the Mechanical Properties and Energy Absorbing Capability of Polyurethane Microcellular Elastomers under Different Compressive Strain Rates},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {778},
  doi = {10.3390/polym15030778}
}
Kostenlos starten →