EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Review on the Degradation of Poly(lactic acid) during Melt Processing

Ineke Velghe iD, Bart Buffel iD, Veerle Vandeginste iD, Wim Thielemans iD, Frederik Desplentere iD

Polymers · 25.04.2023 · 15 (9) · 2047

DOI: 10.3390/polym15092047 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 25.04.2023. Verfasst von Ineke Velghe und 4 weiteren Autor:innen. Beteiligte Einrichtung: Processing of Polymers and Innovative Material Systems ProPoliS, Department of Materials Engineering, KU Leuven Campus Bruges, Spoorwegstraat 12, 820…. Die Arbeit wurde bisher 161-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation - Flanders, Research Foundation—Flanders (FWO).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This review paper presents an overview of the state of the art on process-induced degradation of poly(lactic acid) (PLA) and the relative importance of different processing variables. The sensitivity of PLA to degradation, especially during melt processing, is considered a significant challenge as it may result in deterioration of its properties. The focus of this review is on degradation during melt processing techniques such as injection molding and extrusion, and therefore it does not deal with biodegradation. Firstly, the general processing and fundamental variables that determine the degradation are discussed. Secondly, the material properties (for example rheological, thermal, and mechanical) are presented that can be used to monitor and quantify the degradation. Thirdly, the effects of different processing variables on the extent of degradation are reviewed. Fourthly, additives are discussed for melt stabilization of PLA. Although current literature reports the degradation reactions and clearly indicates the effect of degradation on PLA’s properties, there are still knowledge gaps in how to select and predict the processing conditions that minimize process-induced degradation to save raw materials and time during production.

Schlagwörter

Stichwörter der Autor:innen

PLAdegradationmelt processingpoly(lactic acid)

Autor:innen und Institutionen

  • Processing of Polymers and Innovative Material Systems ProPoliS, Department of Materials Engineering, KU Leuven Campus Bruges, Spoorwegstraat 12, 8200 Bruges, Belgium.
  • Surface and Interface Engineering Materials, Department of Materials Engineering, KU Leuven Campus Bruges, Spoorwegstraat 12, 8200 Bruges, Belgium.
  • Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven Campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium.

ORCID-Profile: Ineke Velghe, Bart Buffel, Veerle Vandeginste, Wim Thielemans, Frederik Desplentere

Förderung

  • Research Foundation - Flanders
  • Research Foundation—Flanders (FWO)

Zitieren

APA

Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., & Desplentere, F. (2023). Review on the Degradation of Poly(lactic acid) during Melt Processing. Polymers, 15(9), 2047. https://doi.org/10.3390/polym15092047

Vancouver

Velghe I, Buffel B, Vandeginste V, Thielemans W, Desplentere F. Review on the Degradation of Poly(lactic acid) during Melt Processing. Polymers. 2023;15(9):2047. doi:10.3390/polym15092047

BibTeX
@article{Velghe2023,
  author = {Velghe, Ineke and Buffel, Bart and Vandeginste, Veerle and Thielemans, Wim and Desplentere, Frederik},
  title = {Review on the Degradation of Poly(lactic acid) during Melt Processing},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {2047},
  doi = {10.3390/polym15092047}
}
Kostenlos starten →