EUVIMEDScopri EUVIMED
Crossref

Frontal Polymerization of Phytic Acid Containing Hexaacrylate, Triacrylate, and Fillers

Maria Martinez, Karan Bansal, John A. Pojman, Mohiuddin Quadir

Journal of Applied Polymer Science · 2025-03-10 · 142 (10)

DOI: 10.1002/app.56561 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2024-12-16. Written by Maria Martinez and 3 co-authors. Cited 5 times so far (Crossref); 79 references. Funded by: National Institute of Food and Agriculture, Louisiana Board of Regents.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Frontal polymerization (FP) has been used in the application of coatings, adhesive, and composites. In this work, a new bio‐based phytic acid monomer, known as phyto‐urethane acrylate (PUA) with demonstrated flame retardant abilities, has been incorporated and frontally polymerized into a base formulation composed of trimethylolpropane triacrylate (TMPTA), a peroxide thermal radical initiator and fumed silica. This is the first report of a hexaacrylate monomer cured via FP. Four different fillers (magnesium hydroxide, nano zinc oxide, milled carbon fiber, and melamine), known for their flame‐retardant properties were also incorporated into the base formulation along with PUA resin. The front velocity, front temperature and viscosity were studied for all formulations in detail. Thermal analysis of the composites showed that composites prepared in this research have high glass transition temperature above 200°C and degradation temperature above 300°C. Surface properties before and after burning events were captured via SEM, and it was found that formulation containing PUA resin showed bubble morphology, which indicates char formation. Microcomputed tomography (μ‐CT) showed that quantity and morphology of the pores in the composites can be altered with the incorporation of PUA resin and fillers.

Funding

  • National Institute of Food and Agriculture
  • Louisiana Board of Regents

Cite

APA

Martinez, M., Bansal, K., Pojman, J. A., & Quadir, M. (2025). Frontal Polymerization of Phytic Acid Containing Hexaacrylate, Triacrylate, and Fillers. Journal of Applied Polymer Science, 142(10). https://doi.org/10.1002/app.56561

Vancouver

Martinez M, Bansal K, Pojman JA, Quadir M. Frontal Polymerization of Phytic Acid Containing Hexaacrylate, Triacrylate, and Fillers. Journal of Applied Polymer Science. 2025;142(10). doi:10.1002/app.56561

BibTeX
@article{Martinez2025,
  author = {Martinez, Maria and Bansal, Karan and Pojman, John A. and Quadir, Mohiuddin},
  title = {Frontal Polymerization of Phytic Acid Containing Hexaacrylate, Triacrylate, and Fillers},
  journal = {Journal of Applied Polymer Science},
  year = {2025},
  volume = {142},
  number = {10},
  doi = {10.1002/app.56561}
}
Start for free →