EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phytic Acid-Containing Reactive Acrylic Emulsions in Leather Coating Applications

Kaan Canli, Catalina N Cheaburu-Yilmaz iD, Raluca Nicoleta Darie-Nita iD, Onur Yilmaz iD

Polymers · 30.10.2025 · 17 (21) · 2905

DOI: 10.3390/polym17212905 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.10.2025. Verfasst von Kaan Canli und 3 weiteren Autor:innen. Beteiligte Einrichtung: Leather Engineering Department, Faculty of Engineering, Ege University, 35100 Izmir, Türkiye. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Phytic acid, as a natural originated compound with multi phosphate side groups, is known to increase the corrosion protection and thermal resistance of the coatings. In this study, two different acrylic emulsion polymers containing epoxy and silane reactive functional groups (glycidyl methacrylate (GMA) and vinyltriethoxysilane (VTES)) were synthesized via emulsion polymerization and mixed with phytic acid (PA) solution in different ratios (5, 10, 15 wt%) for use as binders in leather finishing applications. The colloidal stability, particle size distribution, and chemical structures of the synthesized polymers were characterized through comprehensive analyses. The resulting reactive copolymer dispersions were used as binders in finishing formulations and applied to crust shoe upper leathers The coating performance was evaluated in terms of rub fastness, flex resistance, water spotting, and thermal resistance, using the unmodified reactive acrylic binders (G0 and V0) as reference systems to assess the improvements achieved. Both phytic acid-modified binders exhibited strong film integrity and maintained high dry rub fastness up to 2000 cycles and wet rub fastness up to 250 cycles at phytic acid concentrations of 5–10 wt%. Increasing the phytic acid content beyond this range led to reduced dispersion stability and partial loss of coating performance. The results confirm that incorporating moderate levels of phytic acid into reactive acrylic emulsions enhances coating durability and thermal resistance without compromising film appearance, offering a safer and more sustainable alternative to conventional crosslinking systems for leather finishing applications.

Schlagwörter

Stichwörter der Autor:innen

binderemulsion polymerizationglycidyl methacrylateleather finishingphytic acidreactive acrylic polymervinyltriethoxysilane

Autor:innen und Institutionen

  • Leather Engineering Department, Faculty of Engineering, Ege University, 35100 Izmir, Türkiye.
  • Chemistry Department, Tınaztepe Campus, Dokuz Eylul University, 35390 Izmir, Türkiye.
  • Physical Chemistry of Polymers Department, "Petru Poni" Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi, Romania.

ORCID-Profile: Catalina N Cheaburu-Yilmaz, Raluca Nicoleta Darie-Nita, Onur Yilmaz

Zitieren

APA

Canli, K., Cheaburu-Yilmaz, C. N., Darie-Nita, R. N., & Yilmaz, O. (2025). Phytic Acid-Containing Reactive Acrylic Emulsions in Leather Coating Applications. Polymers, 17(21), 2905. https://doi.org/10.3390/polym17212905

Vancouver

Canli K, Cheaburu-Yilmaz CN, Darie-Nita RN, Yilmaz O. Phytic Acid-Containing Reactive Acrylic Emulsions in Leather Coating Applications. Polymers. 2025;17(21):2905. doi:10.3390/polym17212905

BibTeX
@article{Canli2025,
  author = {Canli, Kaan and Cheaburu-Yilmaz, Catalina N and Darie-Nita, Raluca Nicoleta and Yilmaz, Onur},
  title = {Phytic Acid-Containing Reactive Acrylic Emulsions in Leather Coating Applications},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {21},
  pages = {2905},
  doi = {10.3390/polym17212905}
}
Kostenlos starten →