EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Fatigue assessment of cord rubber composite air spring bellows based on specimen testing and numerical analysis

Julian Torggler, Tobias Faethe, Heiko Müller, Andreas Dutzler, Eduardo Machado Charry, Christian Buzzi, Martin Leitner

Journal of Applied Polymer Science · 2024-10-05 · 141 (37)

DOI: 10.1002/app.55949 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2024-07-06. Written by Julian Torggler and 6 co-authors. Cited 10 times so far (Crossref); 61 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Rail vehicle air spring bellows consisting of cord rubber composites are subject to a wide variety of stresses. It is therefore crucial to understand the fatigue behavior of such components, as the development process involves the use of empirical methods, which are both time‐consuming and costly. This paper outlines a methodology for assessing the fatigue strength of air spring bellows through representative specimen testing. Ten component tests and a validated numerical model of the air spring bellows are presented. The primary loading scenario investigated in this study is pure pulsating tensile stress with a strain ratio R in the range of 0–0.25. This scenario is considered to be highly damaging, leading to delamination. Comprehensive damage analysis of the specimen is performed using microcomputed tomography. To ensure the transferability of the results, a failure criterion is defined as 20% elongation of the specimen, based on the defined 10% internal pressure drop for the bellow. After statistical evaluation, the transferability of the specimen tests to the component is validated using a local fatigue approach. The correlation coefficient R 2 is 0.84, indicating a sound agreement between model and tests with 7 points out of 10 within a scatter factor of 2.

Cite

APA

Torggler, J., Faethe, T., Müller, H., Dutzler, A., Charry, E. M., Buzzi, C., & Leitner, M. (2024). Fatigue assessment of cord rubber composite air spring bellows based on specimen testing and numerical analysis. Journal of Applied Polymer Science, 141(37). https://doi.org/10.1002/app.55949

Vancouver

Torggler J, Faethe T, Müller H, Dutzler A, Charry EM, Buzzi C, et al. Fatigue assessment of cord rubber composite air spring bellows based on specimen testing and numerical analysis. Journal of Applied Polymer Science. 2024;141(37). doi:10.1002/app.55949

BibTeX
@article{Torggler2024,
  author = {Torggler, Julian and Faethe, Tobias and Müller, Heiko and Dutzler, Andreas and Charry, Eduardo Machado and Buzzi, Christian and Leitner, Martin},
  title = {Fatigue assessment of cord rubber composite air spring bellows based on specimen testing and numerical analysis},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {37},
  doi = {10.1002/app.55949}
}
Start for free →