EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue Behavior of Cord-Rubber Composite Materials under Different Loading Conditions

Julian Torggler iD, Martin Leitner iD, Christian Buzzi, Tobias Faethe, Heiko Müller, Eduardo Machado Charry iD

Materials · 28.09.2024 · 17 (19) · 4771

DOI: 10.3390/ma17194771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.09.2024. Verfasst von Julian Torggler und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Structural Durability and Railway Technology, Graz University of Technology, Inffeldgasse 25/D, 8010 Graz, Austria. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cord-rubber composites are subjected to a wide range of loads in various applications. However, their fatigue behavior remains relatively under-researched. To address this gap, a set of representative specimens was developed, and a validated numerical model was employed to assess fatigue-relevant parameters. In this study, we present the results from two series of tests with different strain ratios (R values). One series was subjected to a pure pulsating tensile strain (R ~0), while the second series experienced an increased mean strain with an R ratio between 0.2 and 0.3. A direct comparison of the two series demonstrated that a higher strain ratio results in a longer service life. This is reflected in an increase in the slope (k) from 13 to 23, as well as an increase in the ultimate fiber strain from 8% to 11% at Nd = 50,000 load cycles for a survival probability of 50%. Both series indicate a comparable scatter in the test results. This comparative analysis shows that the strain ratio significantly impacts the fatigue behavior of cord-rubber composite materials based on cyclic tests under different loading conditions. The findings of this study demonstrate the necessity of considering different load situations when evaluating or designing components.

Schlagwörter

Stichwörter der Autor:innen

cord-rubber compositesfatigue designmechanical testingnumerical analysistomography

Autor:innen und Institutionen

  • Institute of Structural Durability and Railway Technology, Graz University of Technology, Inffeldgasse 25/D, 8010 Graz, Austria.
  • Siemens Mobility Austria GmbH, Eggenberger Straße 31, 8020 Graz, Austria.
  • GMT Gummi-Metall-Technik GmbH, Liechtersmatten 5, 77815 Bühl, Germany.
  • Institute of Solid State Physics, Graz University of Technology, Petersgasse 16, 8010 Graz, Austria.

ORCID-Profile: Julian Torggler, Martin Leitner, Eduardo Machado Charry

Zitieren

APA

Torggler, J., Leitner, M., Buzzi, C., Faethe, T., Müller, H., & Machado Charry, E. (2024). Fatigue Behavior of Cord-Rubber Composite Materials under Different Loading Conditions. Materials, 17(19), 4771. https://doi.org/10.3390/ma17194771

Vancouver

Torggler J, Leitner M, Buzzi C, Faethe T, Müller H, Machado Charry E. Fatigue Behavior of Cord-Rubber Composite Materials under Different Loading Conditions. Materials. 2024;17(19):4771. doi:10.3390/ma17194771

BibTeX
@article{Torggler2024,
  author = {Torggler, Julian and Leitner, Martin and Buzzi, Christian and Faethe, Tobias and Müller, Heiko and Machado Charry, Eduardo},
  title = {Fatigue Behavior of Cord-Rubber Composite Materials under Different Loading Conditions},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4771},
  doi = {10.3390/ma17194771}
}
Kostenlos starten →