Stability assessment of a commercial polypropylene copolymer and Irgafos 168 under repeated injection molding and γ‐irradiation cycles
Journal of Applied Polymer Science · 10.03.2024 · 141 (10)
DOI: 10.1002/app.55071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 20.12.2023. Verfasst von Nele Zerhusen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Despite the increasing importance of recycling, the medical sector is hardy engaged at this time due to regulatory issues. The aim of this study was to evaluate the influence of γ‐radiation sterilization (48–52 kGy ) on the repetitive injection molding of a polypropylene copolymer for medical applications. For this purpose, the material was analyzed after injection molding and irradiation. To evaluate the irradiation and reprocessing influence, optical, rheological, and mechanical properties were investigated in addition to chromatography. The latter comprised the quantitative determination of Irgafos 168 and the qualitative comparison of volatile degradation products formed, including the radiolysis product 1,3‐di‐tert‐butylbenzene. The influence of irradiation on the content of Irgafos 168, volatile organic compounds, and 1,3‐di‐tert‐butylbenzene was greatest after the first irradiation, with a decrease of Irgafos 168 content by 40%. The yellowness index and melting enthalpy were influenced by irradiation and processing, but showed no direct relationship to the individual process steps. The zero viscosity correlated directly with gas chromatography–mass spectrometry results and decreased by 80% after the first irradiation. In addition, the elongation at break was reduced by 95% after the second irradiation. The influence of irradiation on the studied characteristics was high, whereas the influence of repetitive processing did not show any measurable differences
Zitieren
APA
Zerhusen, N., Herrmann, S., Susoff, M. L., & Petersen, S. (2024). Stability assessment of a commercial polypropylene copolymer and Irgafos 168 under repeated injection molding and γ‐irradiation cycles. Journal of Applied Polymer Science, 141(10). https://doi.org/10.1002/app.55071
Vancouver
Zerhusen N, Herrmann S, Susoff ML, Petersen S. Stability assessment of a commercial polypropylene copolymer and Irgafos 168 under repeated injection molding and γ‐irradiation cycles. Journal of Applied Polymer Science. 2024;141(10). doi:10.1002/app.55071
BibTeX
@article{Zerhusen2024,
author = {Zerhusen, Nele and Herrmann, Susanna and Susoff, Markus Lothar and Petersen, Svea},
title = {Stability assessment of a commercial polypropylene copolymer and Irgafos 168 under repeated injection molding and γ‐irradiation cycles},
journal = {Journal of Applied Polymer Science},
year = {2024},
volume = {141},
number = {10},
doi = {10.1002/app.55071}
}
EUVIMED