EUVIMEDEUVIMED entdecken
Open Access

Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate)

Maddison I Segal iD, Alexander J Bahnick iD, Nicola G Judge iD, Matthew L Becker iD

Angewandte Chemie International Edition · 10.01.2025 · 64 (2)

DOI: 10.1002/anie.202414016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 25.10.2024. Verfasst von Maddison I Segal und 3 weiteren Autor:innen. Beteiligte Einrichtung: Thomas Lord Department of Mechanical Engineering & Material Science, Duke University, Durham, NC, USA. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: NHLBI NIH HHS, National Heart, Lung, and Blood Institute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital light processing (DLP) printing forms solid constructs from fluidic resins by photochemically crosslinking polymeric resins with reactive functional groups. DLP is used widely due to its efficient, high‐resolution printing, but its use and translational potential has been limited in some applications as state‐of‐the‐art resins experience unpredictable and anisotropic part shrinkage due to the use of solvent needed to reduce resin viscosity and layer dependent crosslinking. Herein, poly(allyl glycidyl ether succinate) (PAGES), a low viscosity, degradable polyester, was synthesized by ring opening copolymerization and used in combination with degradable thiol crosslinkers to afford a solvent free resin that can be utilized in DLP printing. Varying resin formulations of PAGES polymer are shown to decrease part shrinkage from 14 % to 0.3 %. Photochemically printed parts fabricated from PAGES possess tensile moduli between 0.43 and 6.18 MPa and degradation profiles are shown to vary between 12 and 40 days under accelerated conditions based on degree of polymerization and crosslink ratio.

Schlagwörter

Stichwörter der Autor:innen

3D printingdegradable polymerspolyestersolvent freethiol-ene crosslinking

Autor:innen und Institutionen

  • Thomas Lord Department of Mechanical Engineering & Material Science, Duke University, Durham, NC, USA.
  • Department of Chemistry, Duke University, Durham, NC, USA.
  • Department of Biomedical Engineering, Duke University, Durham, NC, USA.
  • Department of Orthopedic Surgery, Duke University, Durham, NC, 27708, USA.

ORCID-Profile: Maddison I Segal, Alexander J Bahnick, Nicola G Judge, Matthew L Becker

Förderung

  • NHLBI NIH HHS
  • National Heart, Lung, and Blood Institute

Zitieren

APA

Segal, M. I., Bahnick, A. J., Judge, N. G., & Becker, M. L. (2025). Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate). Angewandte Chemie International Edition, 64(2). https://doi.org/10.1002/anie.202414016

Vancouver

Segal MI, Bahnick AJ, Judge NG, Becker ML. Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate). Angewandte Chemie International Edition. 2025;64(2). doi:10.1002/anie.202414016

BibTeX
@article{Segal2025,
  author = {Segal, Maddison I and Bahnick, Alexander J and Judge, Nicola G and Becker, Matthew L},
  title = {Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate)},
  journal = {Angewandte Chemie International Edition},
  year = {2025},
  volume = {64},
  number = {2},
  doi = {10.1002/anie.202414016}
}
Kostenlos starten →