EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self‐Formation of SnCl 2 Passivation Layer on SnO 2 Electron‐Transport Layer in Chloride–Iodide‐Based Perovskite Solar Cell

Ashraful Hossain Howlader, Shahriyar Safat Dipta, Walia Binte Tarique, Yulun Qi, Ayush Pratik, Yao Yin, Md Anower Hossain, Ashraf Uddin

Advanced Energy and Sustainability Research · 2024-07 · 5 (7)

DOI: 10.1002/aesr.202400030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy and Sustainability Research, online erschienen am 15.03.2024. Verfasst von Ashraful Hossain Howlader und 7 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The phenomenon of the self‐formation of a passivation layer at the interface of the perovskite/electron‐transport layer (ETL) is observed. FA 0.6 MA 0.4 PbI 3− x Cl x perovskite thin film is deposited on a SnO 2 nanoparticle thin‐film ETL. It is observed from the depth‐resolved spectroscopy that the Sn 2+ ion migrates toward the perovskite layer within the ETL. At the same time, Cl − ion also migrates toward ETL within the perovskite layer. This unique ion migration phenomenon leads us to conclude that a passivating SnCl 2 layer is formed at the perovskite/ETL interface. It is found that this SnCl 2 layer at the interface works as a passivation layer like Al 2 O 3 . There is a significant effect of this self‐formed passivating layer behind the improvement of the device's efficiency and stability. It is believed that this SnCl 2 passivation layer helps to reduce the recombination loss at the interface and boosts the performance of the perovskite solar cell (PSC). The perovskite/hole‐transport layer is also passivated with octylammonium bromide. Finally, the PSC offers a photoconversion efficiency (PCE) of 20.81% under 1 sun and AM1.5 G condition. Again, it maintains more than 80% of PCE under open‐air room conditions, white light emitting diode, and 85 °C continuous heating for more than 12 h without encapsulation.

Zitieren

APA

Howlader, A. H., Dipta, S. S., Tarique, W. B., Qi, Y., Pratik, A., Yin, Y., Hossain, M. A., & Uddin, A. (2024). Self‐Formation of SnCl 2 Passivation Layer on SnO 2 Electron‐Transport Layer in Chloride–Iodide‐Based Perovskite Solar Cell. Advanced Energy and Sustainability Research, 5(7). https://doi.org/10.1002/aesr.202400030

Vancouver

Howlader AH, Dipta SS, Tarique WB, Qi Y, Pratik A, Yin Y, et al. Self‐Formation of SnCl 2 Passivation Layer on SnO 2 Electron‐Transport Layer in Chloride–Iodide‐Based Perovskite Solar Cell. Advanced Energy and Sustainability Research. 2024;5(7). doi:10.1002/aesr.202400030

BibTeX
@article{Howlader2024,
  author = {Howlader, Ashraful Hossain and Dipta, Shahriyar Safat and Tarique, Walia Binte and Qi, Yulun and Pratik, Ayush and Yin, Yao and Hossain, Md Anower and Uddin, Ashraf},
  title = {Self‐Formation of SnCl 2 Passivation Layer on SnO 2 Electron‐Transport Layer in Chloride–Iodide‐Based Perovskite Solar Cell},
  journal = {Advanced Energy and Sustainability Research},
  year = {2024},
  volume = {5},
  number = {7},
  doi = {10.1002/aesr.202400030}
}
Kostenlos starten →