CuCl 2 -modified SnO 2 electron transport layer for high efficiency perovskite solar cells
Nanotechnology · 23.07.2023 · 34 (30) · 305401
DOI: 10.1088/1361-6528/accfa3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanotechnology, online erschienen am 09.05.2023. Verfasst von Liang Han und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Optical Field Manipulation of Zhejiang Province, Department of Physics, Zhejiang Sci-Tech University, Hangzhou 310018, People's Rep…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: Natural Science Foundation of Zhejiang Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
SnO 2 film is one of the most widely used electron transport layers (ETL) in perovskite solar cells (PSCs). However, the inherent surface defect states in SnO 2 film and mismatch of the energy level alignment with perovskite limit the photovoltaic performance of PSCs. It is of great interesting to modify SnO 2 ETL with additive, aiming to decrease the surface defect states and obtain well aligned energy level with perovskite. In this paper, anhydrous copper chloride (CuCl 2 ) was employed to modify the SnO 2 ETL. It is found that the adding of a small amount of CuCl 2 into the SnO 2 ETL can improve the proportion of Sn 4+ in SnO 2 , passivate oxygen vacancies at the surface of SnO 2 nanocrystals, improve the hydrophobicity and conductivity of ETL, and obtain a good energy level alignment with perovskite. As a result, both the photoelectric conversion efficiency (PCE) and stability of the PSCs based on SnO 2 ETLs modified with CuCl 2 (SnO 2 -CuCl 2 ) is improved in comparison with that of the PSCs on pristine SnO 2 ETLs. The optimal PSC based on SnO 2 -CuCl 2 ETL exhibits a much higher PCE of 20.31% as compared to the control device (18.15%). The unencapsulated PSCs with CuCl 2 modification maintain 89.3% of their initial PCE after exposing for 16 d under ambient conditions with a relative humidity of 35%. Cu(NO 3 ) 2 was also employed to modify the SnO 2 ETL and achieved a similar effect as that of CuCl 2 , indicating that the cation Cu 2+ plays the main role in SnO 2 ETL modification.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Optical Field Manipulation of Zhejiang Province, Department of Physics, Zhejiang Sci-Tech University, Hangzhou 310018, People's Republic of China.
- Zhejiang University City College, Hangzhou 310015, People's Republic of China.
- State Key Laboratory of Silicon Materials and School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, People's Republic of China.
ORCID-Profile: Ping Lin, Peng Wang, Lingbo Xu, Xuegong Yu, Can Cui
Förderung
- Natural Science Foundation of Zhejiang Province
- National Natural Science Foundation of China
Zitieren
APA
Han, L., Hu, H., Yuan, M., Lin, P., Wang, P., Xu, L., Yu, X., & Cui, C. (2023). CuCl 2 -modified SnO 2 electron transport layer for high efficiency perovskite solar cells. Nanotechnology, 34(30), 305401. https://doi.org/10.1088/1361-6528/accfa3
Vancouver
Han L, Hu H, Yuan M, Lin P, Wang P, Xu L, et al. CuCl 2 -modified SnO 2 electron transport layer for high efficiency perovskite solar cells. Nanotechnology. 2023;34(30):305401. doi:10.1088/1361-6528/accfa3
BibTeX
@article{Han2023,
author = {Han, Liang and Hu, Haihua and Yuan, Min and Lin, Ping and Wang, Peng and Xu, Lingbo and Yu, Xuegong and Cui, Can},
title = {CuCl 2 -modified SnO 2 electron transport layer for high efficiency perovskite solar cells},
journal = {Nanotechnology},
year = {2023},
volume = {34},
number = {30},
pages = {305401},
doi = {10.1088/1361-6528/accfa3}
}
EUVIMED