EUVIMEDEUVIMED entdecken
Crossref

In situ Ligand‐Managed SnO 2 Electron Transport Layer for High‐Efficiency and Stable Perovskite Solar Cells

Yulu Sun, Ruoyao Xu, Lin Yang, Jinfei Dai, Xinyi Zhu, Xiangrong Cao, Peizhou Li, Hebing Tang, Tao Liu, Daolei Mo, Yunxuan Wang, Jingrui Li und 4 weitere

Advanced Functional Materials · 2024-12 · 34 (51)

DOI: 10.1002/adfm.202410165 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 18.08.2024. Verfasst von Yulu Sun und 15 weiteren Autor:innen. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tin oxide (SnO 2 ) with high conductivity and excellent photostability has been considered as one of the most promising materials for efficient electron transport layer (ETL) in perovskite solar cells (PSCs). Among them, SnO 2 nanoparticles (NPs) dispersions have been extensively utilized due to their facile film formation. However, the inherent defects and agglomeration issues of SnO 2 NPs, as well as the limited tunability and instability of the post‐treatment process for surface/interface engineering strategy, still hinder its further applications. Herein, a ligand‐management strategy implemented during the in situ synthesis of NPs that can effectively achieve uniform modification of NPs is proposed. During the synthesis of SnO 2 NPs, the grafting reaction between diethyl 2‐chloromalonate (DCMA) and the surface of SnO 2 NPs is completed. Compared with the post‐treatment process, this intrinsic DCMA‐passivated SnO 2 (DCMA‐SnO 2 ) effectively reduces the trap state density at the interface between perovskite and ETL while enhancing surface chemical stability. Consequently, PSCs based on DCMA‐SnO 2 achieve a champion PCE of 25.39% for small cells (active area of 0.0655 cm 2 ) and 20.61% for solar modules (active area of 23.25 cm 2 ), demonstrating excellent shelf‐life/light soaking stability (advanced level of ISOS stability protocols). This ligand‐management strategy exhibits significant application potential in preparing high‐efficiency large‐area PSCs.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Sun, Y., Xu, R., Yang, L., Dai, J., Zhu, X., Cao, X., Li, P., Tang, H., Liu, T., Mo, D., Wang, Y., Li, J., Yuan, F., Jiao, B., Wu, Z., & Dong, H. (2024). In situ Ligand‐Managed SnO 2 Electron Transport Layer for High‐Efficiency and Stable Perovskite Solar Cells. Advanced Functional Materials, 34(51). https://doi.org/10.1002/adfm.202410165

Vancouver

Sun Y, Xu R, Yang L, Dai J, Zhu X, Cao X, et al. In situ Ligand‐Managed SnO 2 Electron Transport Layer for High‐Efficiency and Stable Perovskite Solar Cells. Advanced Functional Materials. 2024;34(51). doi:10.1002/adfm.202410165

BibTeX
@article{Sun2024,
  author = {Sun, Yulu and Xu, Ruoyao and Yang, Lin and Dai, Jinfei and Zhu, Xinyi and Cao, Xiangrong and Li, Peizhou and Tang, Hebing and Liu, Tao and Mo, Daolei and Wang, Yunxuan and Li, Jingrui and Yuan, Fang and Jiao, Bo and Wu, Zhaoxin and Dong, Hua},
  title = {In situ Ligand‐Managed SnO 2 Electron Transport Layer for High‐Efficiency and Stable Perovskite Solar Cells},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {51},
  doi = {10.1002/adfm.202410165}
}
Kostenlos starten →