EUVIMEDDescubrir EUVIMED
Open access · CC BY 4.0

High‐Conductivity Active Interface Layer for Active Lithium Reservoir in Micro‐Silicon‐Based All‐Solid‐State Batteries

Ziqing Wang, Xinxin Zhu, Ruichen Zhu, Wendi Dou, Qian Zhang, Jun Lu iD, Junxiu Wu iD

Advanced Science · 2026-11-02

DOI: 10.1002/advs.78198 ↗

At a glance

Journal article in Advanced Science, published online on 2026-11-02. Written by Ziqing Wang and 6 co-authors. Institution: College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China. 35 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, Major Research Plan of the National Natural Science Foundation of China, Zhejiang Province Innovation Team.

ResumenSubjectsDatos bibliográficosCiteRelated studies

Abstract (original language)

Sulfide‐based all‐solid‐state lithium‐ion batteries (ASSLIBs) employing fully active, carbon‐free micro‐silicon (µSi) anodes present significant potential for high energy density, enhanced safety, and reduced cost. However, their practical application is challenged by inherent issues such as sluggish reaction kinetics, substantial volume expansion, and low Coulombic efficiency, which collectively degrade overall electrochemical performance. Herein, an interfacial engineering strategy is developed to construct an active interface layer on µSi particles via a mechanochemical cold‐pressing method. The resulting Li─Si alloy layer acts as an active lithium reservoir, which enables active lithium reservoir. Furthermore, this spontaneously formed active layer exhibits high ionic/electronic conductivities and accommodates volume changes due to its favorable mechanical properties, thereby improving electrode reaction kinetics and structural stability. ASSLIBs fabricated with LiNi 0.83 Co 0.12 Mn 0.05 O 2 cathode and modified µSi anode deliver a high initial specific capacity of 182.55 mAh g −1 and retain a capacity retention of 89.2% after 200 cycles at 0.1 C. This work offers a facile interfacial engineering technique for constructing self‐compensating lithium reservoirs and promotes the development of high‐energy‐density silicon‐based solid‐state batteries.

Subjects

Author keywords

active interface layeractive lithium reservoirall‐solid‐state lithium‐ion batteriespre‐lithiation, silicon anodes

Authors and institutions

  • College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China.
  • School of Chemistry and Materials Science, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou, China.

ORCID profiles: Jun Lu, Junxiu Wu

Funding

  • National Natural Science Foundation of China
  • Major Research Plan of the National Natural Science Foundation of China
  • Zhejiang Province Innovation Team

Cite

APA

Wang, Z., Zhu, X., Zhu, R., Dou, W., Zhang, Q., Lu, J., & Wu, J. (2026). High‐Conductivity Active Interface Layer for Active Lithium Reservoir in Micro‐Silicon‐Based All‐Solid‐State Batteries. Advanced Science. https://doi.org/10.1002/advs.78198

Vancouver

Wang Z, Zhu X, Zhu R, Dou W, Zhang Q, Lu J, et al. High‐Conductivity Active Interface Layer for Active Lithium Reservoir in Micro‐Silicon‐Based All‐Solid‐State Batteries. Advanced Science. 2026. doi:10.1002/advs.78198

BibTeX
@article{Wang2026,
  author = {Wang, Ziqing and Zhu, Xinxin and Zhu, Ruichen and Dou, Wendi and Zhang, Qian and Lu, Jun and Wu, Junxiu},
  title = {High‐Conductivity Active Interface Layer for Active Lithium Reservoir in Micro‐Silicon‐Based All‐Solid‐State Batteries},
  journal = {Advanced Science},
  year = {2026},
  doi = {10.1002/advs.78198}
}
Start for free →