EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Programmable Sequential 4D Actuation in Multistable Kirigami Metamaterials

Eui-Hyun Kim iD, Minsung Kim iD, Hyunsik Yoon iD, Keun Park iD

Advanced Science · 2026-11 · 13 (62)

DOI: 10.1002/advs.77412 ↗

At a glance

Journal article in Advanced Science, published online on 2026-08-24. Written by Eui-Hyun Kim and 3 co-authors. Institution: Department of Mechanical Design and Robot Engineering, Seoul National University of Science and Technology, Seoul, Republic of Korea. 42 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Research Foundation of Korea, Ministry of Science and ICT, Republic of Korea.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Programmable shape transformation is essential for adaptive soft mechanisms operating in constrained or dynamic environments. This study presents a modular kirigami metamaterial platform that enables programmable multistability and sequential 4D actuation through thermally triggered recovery. Inspired by geometric motifs from traditional Korean Dancheong patterns, in which symmetry and motif stacking govern pattern formation, two kirigami unit cells with different slit configurations are designed to exhibit distinct bistable responses and directional auxetic behavior. Using dual‐material additive manufacturing, each cell integrates thermally responsive and passive thermoplastics to achieve cold‐programmed bistability and sequential 4D actuation. This approach is validated through three functional mechanisms: (i) multimodal bridging structures capable of both mechanically and thermally induced reconfigurations; (ii) multistable 4D grippers capable of inward and outward transformations; and (iii) a biomimetic underwater cleaning robot that autonomously collects and encloses floating debris through sequential thermal recovery. All functions are achieved without electronic or pneumatic actuators, relying entirely on mechanically encoded transformations and thermal activation. Furthermore, the use of thermoplastics provides higher stiffness than elastomer‐based actuators, opening new opportunities for thermo‐mechanically encoded actuation with improved mechanical robustness.

Subjects

Author keywords

4D printingauxetic metamaterialbistabilitymultistable morphingsoft robotics

Authors and institutions

  • Department of Mechanical Design and Robot Engineering, Seoul National University of Science and Technology, Seoul, Republic of Korea.
  • Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology, Seoul, Republic of Korea.

ORCID profiles: Eui-Hyun Kim, Minsung Kim, Hyunsik Yoon, Keun Park

Funding

  • National Research Foundation of Korea
  • Ministry of Science and ICT, Republic of Korea

Cite

APA

Kim, E. H., Kim, M., Yoon, H., & Park, K. (2026). Programmable Sequential 4D Actuation in Multistable Kirigami Metamaterials. Advanced Science, 13(62). https://doi.org/10.1002/advs.77412

Vancouver

Kim EH, Kim M, Yoon H, Park K. Programmable Sequential 4D Actuation in Multistable Kirigami Metamaterials. Advanced Science. 2026;13(62). doi:10.1002/advs.77412

BibTeX
@article{Kim2026,
  author = {Kim, Eui-Hyun and Kim, Minsung and Yoon, Hyunsik and Park, Keun},
  title = {Programmable Sequential 4D Actuation in Multistable Kirigami Metamaterials},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {62},
  doi = {10.1002/advs.77412}
}
Start for free →