EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing

Jenny Flores iD, Arianna Bertero iD, Luca Ceseracciu iD, Daniel Jiménez-Boland iD, Sara Domenici iD, Mattia Bramini iD, Paola Sánchez-Moreno iD, Erica Scarcelli iD, Domenico Galdiero, Pavel Fedorov, Daniil Karnaushenko, Rossella Sesia iD and 7 more

Advanced Science · 2026-11 · 13 (63)

DOI: 10.1002/advs.77092 ↗

At a glance

Journal article in Advanced Science, published online on 2026-08-27. Written by Jenny Flores and 18 co-authors. Institution: Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy. 92 references. The full text is freely available (open access, CC BY 4.0). Funded by: HYSENS, MORPHEUS, European Research Council.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

The incorporation of two‐dimensional (2D) nanomaterials such as molybdenum disulfide (MoS 2 ) nanoflakes/nanosheets into hydrogel matrices offers significant potential for the development of flexible and biocompatible piezoresistive sensors. Scalable synthesis methods, including liquid‐phase exfoliation and hydrothermal processes, enable the efficient production of 2D MoS 2 while reducing cost and environmental impact. Owing to the high surface area, anisotropy, and tunable electronic properties, these materials enhance sensitivity, mechanical strength, and electrical performance in hybrid systems. In this work, 1T‐ MoS 2 ‐based hybrid hydrogels were fabricated via UV curing by forming cross‐linked networks with polyethylene glycol diacrylate (PEGDA) and chitosan (CH). Electrical conductivity was further improved through in situ interfacial polymerization of aniline. The equivalent 3D‐printed hydrogels exhibited enhanced mechanical strength, few‐cycles structural stability, swelling, and controlled deformation compared to simply UV‐cured systems, enabling more reproducible electromechanical responses. Both fabrication approaches showed linear and reversible piezoresistive behavior within the physiological blood pressure range. Furthermore, the optimized hydrogel demonstrated to be reliable in pulse monitoring (ca. 85 bpm) with good temporal correlation to the electrocardiogram signal and biocompatibility with human fibroblast cells, underscoring its potential for soft, flexible, and bio‐integrated sensing applications.

Subjects

Author keywords

2D materialchitosandigital light processing 3D printingheart rate sensorhybrid hydrogel

Authors and institutions

  • Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy.
  • Materials Characterization Facility, Istituto Italiano di Tecnologia, Genova, Italy.
  • Department of Cell Biology, Faculty of Sciences, Universidad de Granada, Granada, Spain.
  • Department of Applied Physics, Faculty of Sciences, Universidad de Granada, Granada, Spain.
  • Center for Sustainable Future Technologies (CSFT), Italian Institute of Technology (IIT), Torino, Italy.
  • Dropper S.r.l., Torino, Italy.

ORCID profiles: Jenny Flores, Arianna Bertero, Luca Ceseracciu, Daniel Jiménez-Boland, Sara Domenici, Mattia Bramini, Paola Sánchez-Moreno, Erica Scarcelli, Rossella Sesia, Ignazio Roppolo, Nicolò Petrini, Marco Sangermano, Bartolomeo Coppola, Teresa Gatti

Funding

  • HYSENS
  • MORPHEUS
  • European Research Council

Cite

APA

Flores, J., Bertero, A., Ceseracciu, L., Jiménez-Boland, D., Domenici, S., Bramini, M., Sánchez-Moreno, P., Scarcelli, E., Galdiero, D., Fedorov, P., Karnaushenko, D., Sesia, R., Roppolo, I., Pozzati, M., Spedicati, M., Petrini, N., Sangermano, M., Coppola, B., & Gatti, T. (2026). Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing. Advanced Science, 13(63). https://doi.org/10.1002/advs.77092

Vancouver

Flores J, Bertero A, Ceseracciu L, Jiménez-Boland D, Domenici S, Bramini M, et al. Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing. Advanced Science. 2026;13(63). doi:10.1002/advs.77092

BibTeX
@article{Flores2026,
  author = {Flores, Jenny and Bertero, Arianna and Ceseracciu, Luca and Jiménez-Boland, Daniel and Domenici, Sara and Bramini, Mattia and Sánchez-Moreno, Paola and Scarcelli, Erica and Galdiero, Domenico and Fedorov, Pavel and Karnaushenko, Daniil and Sesia, Rossella and Roppolo, Ignazio and Pozzati, Micaela and Spedicati, Mattia and Petrini, Nicolò and Sangermano, Marco and Coppola, Bartolomeo and Gatti, Teresa},
  title = {Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {63},
  doi = {10.1002/advs.77092}
}
Start for free →