Flexible Textile-Based Hybrid Piezoresistive Sensors for Human-Motion Monitoring
Polymers · 10.09.2026 · 18 (18) · 2205
DOI: 10.3390/polym18182205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.09.2026. Verfasst von Hatice Aylin Karahan Toprakci und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Materials Engineering, Yalova University, Yalova 77200, Turkey. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: TUBİTAK, Yalova University, Scientific and Technological Research Council of Turkey.
Abstract (Originalsprache)
Textile-based sensors offer a promising platform for human-motion monitoring because of their flexibility, comfort, and ease of integration into clothing. The objective of this study was to develop a textile-based hybrid piezoresistive sensor by combining carbon black (CB) and carbon nanofibers (CNFs) with different filler geometries within a flexible poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) matrix. The novelty of the proposed approach lies in incorporating CB and CNFs into the same elastomeric sensing layer directly deposited onto an elastic knitted textile substrate and systematically comparing its sensing behavior with the corresponding single-filler CB/SEBS and CNF/SEBS systems. Three sensing coatings, CB/SEBS, CNF/SEBS, and hybrid CB+CNF/SEBS, were deposited onto textile substrates by blade coating. All formulations exhibited uniform coating and good adhesion to the fabric. Coating uniformity and adhesion were assessed through visual inspection, electron microscopy, and mechanical cycling by monitoring peeling, cracking, and delamination. Dynamic piezoresistive tests demonstrated that all sensors were capable of strain monitoring, while the 2 wt% CB+ 2 wt% CNF hybrid formulation exhibited the highest sensitivity among the investigated systems. The resistance response was dependent on both the magnitude and rate of strain deformation. The hybrid sensor was further successfully applied to monitor knee, wrist, and elbow movements during physical exercise. These findings demonstrate that the combination of CB and CNF fillers within a flexible SEBS matrix provides a promising route toward highly strain-sensitive textile sensors for wearable human-motion monitoring.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Polymer Materials Engineering, Yalova University, Yalova 77200, Turkey.
- Institute of Graduate Studies, Yalova University, Yalova 77200, Turkey.
ORCID-Profile: Hatice Aylin Karahan Toprakci, Mukaddes Sevval Cetin, Ozan Toprakci
Förderung
- TUBİTAK
- Yalova University
- Scientific and Technological Research Council of Turkey
Zitieren
APA
Karahan Toprakci, H. A., Cetin, M. S., & Toprakci, O. (2026). Flexible Textile-Based Hybrid Piezoresistive Sensors for Human-Motion Monitoring. Polymers, 18(18), 2205. https://doi.org/10.3390/polym18182205
Vancouver
Karahan Toprakci HA, Cetin MS, Toprakci O. Flexible Textile-Based Hybrid Piezoresistive Sensors for Human-Motion Monitoring. Polymers. 2026;18(18):2205. doi:10.3390/polym18182205
BibTeX
@article{KarahanToprakci2026,
author = {Karahan Toprakci, Hatice Aylin and Cetin, Mukaddes Sevval and Toprakci, Ozan},
title = {Flexible Textile-Based Hybrid Piezoresistive Sensors for Human-Motion Monitoring},
journal = {Polymers},
year = {2026},
volume = {18},
number = {18},
pages = {2205},
doi = {10.3390/polym18182205}
}
EUVIMED