EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing

Jenny Flores iD, Arianna Bertero iD, Luca Ceseracciu iD, Daniel Jiménez-Boland iD, Sara Domenici iD, Mattia Bramini iD, Paola Sánchez-Moreno iD, Erica Scarcelli iD, Domenico Galdiero, Pavel Fedorov, Daniil Karnaushenko, Rossella Sesia iD und 7 weitere

Advanced Science · 2026-11 · 13 (63)

DOI: 10.1002/advs.77092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 27.08.2026. Verfasst von Jenny Flores und 18 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy. Die Arbeit nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HYSENS, MORPHEUS, European Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The incorporation of two‐dimensional (2D) nanomaterials such as molybdenum disulfide (MoS 2 ) nanoflakes/nanosheets into hydrogel matrices offers significant potential for the development of flexible and biocompatible piezoresistive sensors. Scalable synthesis methods, including liquid‐phase exfoliation and hydrothermal processes, enable the efficient production of 2D MoS 2 while reducing cost and environmental impact. Owing to the high surface area, anisotropy, and tunable electronic properties, these materials enhance sensitivity, mechanical strength, and electrical performance in hybrid systems. In this work, 1T‐ MoS 2 ‐based hybrid hydrogels were fabricated via UV curing by forming cross‐linked networks with polyethylene glycol diacrylate (PEGDA) and chitosan (CH). Electrical conductivity was further improved through in situ interfacial polymerization of aniline. The equivalent 3D‐printed hydrogels exhibited enhanced mechanical strength, few‐cycles structural stability, swelling, and controlled deformation compared to simply UV‐cured systems, enabling more reproducible electromechanical responses. Both fabrication approaches showed linear and reversible piezoresistive behavior within the physiological blood pressure range. Furthermore, the optimized hydrogel demonstrated to be reliable in pulse monitoring (ca. 85 bpm) with good temporal correlation to the electrocardiogram signal and biocompatibility with human fibroblast cells, underscoring its potential for soft, flexible, and bio‐integrated sensing applications.

Schlagwörter

Stichwörter der Autor:innen

2D materialchitosandigital light processing 3D printingheart rate sensorhybrid hydrogel

Autor:innen und Institutionen

  • Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy.
  • Materials Characterization Facility, Istituto Italiano di Tecnologia, Genova, Italy.
  • Department of Cell Biology, Faculty of Sciences, Universidad de Granada, Granada, Spain.
  • Department of Applied Physics, Faculty of Sciences, Universidad de Granada, Granada, Spain.
  • Center for Sustainable Future Technologies (CSFT), Italian Institute of Technology (IIT), Torino, Italy.
  • Dropper S.r.l., Torino, Italy.

ORCID-Profile: Jenny Flores, Arianna Bertero, Luca Ceseracciu, Daniel Jiménez-Boland, Sara Domenici, Mattia Bramini, Paola Sánchez-Moreno, Erica Scarcelli, Rossella Sesia, Ignazio Roppolo, Nicolò Petrini, Marco Sangermano, Bartolomeo Coppola, Teresa Gatti

Förderung

  • HYSENS
  • MORPHEUS
  • European Research Council

Zitieren

APA

Flores, J., Bertero, A., Ceseracciu, L., Jiménez-Boland, D., Domenici, S., Bramini, M., Sánchez-Moreno, P., Scarcelli, E., Galdiero, D., Fedorov, P., Karnaushenko, D., Sesia, R., Roppolo, I., Pozzati, M., Spedicati, M., Petrini, N., Sangermano, M., Coppola, B., & Gatti, T. (2026). Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing. Advanced Science, 13(63). https://doi.org/10.1002/advs.77092

Vancouver

Flores J, Bertero A, Ceseracciu L, Jiménez-Boland D, Domenici S, Bramini M, et al. Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing. Advanced Science. 2026;13(63). doi:10.1002/advs.77092

BibTeX
@article{Flores2026,
  author = {Flores, Jenny and Bertero, Arianna and Ceseracciu, Luca and Jiménez-Boland, Daniel and Domenici, Sara and Bramini, Mattia and Sánchez-Moreno, Paola and Scarcelli, Erica and Galdiero, Domenico and Fedorov, Pavel and Karnaushenko, Daniil and Sesia, Rossella and Roppolo, Ignazio and Pozzati, Micaela and Spedicati, Mattia and Petrini, Nicolò and Sangermano, Marco and Coppola, Bartolomeo and Gatti, Teresa},
  title = {Printable Piezoresistive Hybrid Hydrogels Based on 2D MoS 2 for Flexible Pulse Sensing},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {63},
  doi = {10.1002/advs.77092}
}
Kostenlos starten →