Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells
Advanced Science · 2026-11 · 13 (62)
DOI: 10.1002/advs.76950 ↗At a glance
Journal article in Advanced Science, published online on 2026-08-21. Written by Deimante Krisiune and 11 co-authors. Institution: Department of Organic Chemistry, Kaunas University of Technology, Kaunas, Lithuania. 66 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Union, HORIZON Research and Innovation Actions, European Commission.
Abstract (original language)
The transition to renewable energy sources, particularly solar power, has highlighted the potential of next‐generation perovskite solar cells (PSCs), which have achieved a power conversion efficiency (PCE) over 27%, rivaling conventional silicon solar cells. A critical component in p‐i‐n PSCs is hole transporting layer (HTL), where polymers like PTAA have shown promise but face challenges in efficiency and commercial viability hindered by high costs and complex synthesis. Recently, enamine‐based HTMs have emerged as a promising alternative due to their superior charge transport properties, structure's tunability, and cost‐effectiveness. Additionally, self‐assembling monolayers (SAMs) have been explored to improve inverted PSC performance by enhancing interface properties and reducing material use. This study combines enamine chemistry and self‐assembly to engineer enamine‐based SAMs with various structural units having ─COOH and ─PO(OH) 2 anchoring groups to optimize SAM/TCO interface and reduce recombination losses. The resulting p‐i‐n devices exhibit high power conversion efficiencies (>25.5%) and improved stability. The champion mini‐module with an aperture area of 29.7 cm 2 realizes a PCE of 23.14% with an FF of 83.11%, highlighting the potential of these materials for scalable photovoltaic applications.
Subjects
Author keywords
Authors and institutions
- Department of Organic Chemistry, Kaunas University of Technology, Kaunas, Lithuania.
- Institute of Molecular Plus, School of Chemical Engineering and Technology, Tianjin University, Tianjin, China.
- Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, China.
- Department of Physics and Energy Engineering, Amirkabir University of Technology, Tehran, Iran.
ORCID profiles: Deimante Krisiune, Yuxuan Yang, Hao Tian, Chuanxiao Xiao, Mahan Saberi Zafarghandi, Ali Keshavarz Mohammadian, Kasparas Rakstys, Yi Zhang, Vytautas Getautis
Funding
- European Union
- HORIZON Research and Innovation Actions
- European Commission
Cite
APA
Krisiune, D., Yang, Y., Xu, Y., Tian, H., Xiao, C., Xia, J., Zafarghandi, M. S., Mohammadian, A. K., Astani, N. A., Rakstys, K., Zhang, Y., & Getautis, V. (2026). Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells. Advanced Science, 13(62). https://doi.org/10.1002/advs.76950
Vancouver
Krisiune D, Yang Y, Xu Y, Tian H, Xiao C, Xia J, et al. Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells. Advanced Science. 2026;13(62). doi:10.1002/advs.76950
BibTeX
@article{Krisiune2026,
author = {Krisiune, Deimante and Yang, Yuxuan and Xu, Yongde and Tian, Hao and Xiao, Chuanxiao and Xia, Jianxing and Zafarghandi, Mahan Saberi and Mohammadian, Ali Keshavarz and Astani, Negar Ashari and Rakstys, Kasparas and Zhang, Yi and Getautis, Vytautas},
title = {Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {62},
doi = {10.1002/advs.76950}
}
EUVIMED